Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[magna941]

Have a 2014 CVO Breakout that has been starting hard. Battery tested fine. Have TTS map EAT617-01 installed and V&H 2-2 big radius exhaust, no other mods. Dealer put digitech on bike and says ACR's are disabled. When i loaded the map the default setting is enabled, i made no changes. Wondering how that is possible to have changed. Any ideas, Steve Cole? Dealer said he needed blue interface box to change, was not able to adjust with digitech.

[Steve Cole]

All you need to do to check it is to reload your calibration. The Mastertune product does not alter the setting or give defaults on the ACR's. What it does do is show you the stored settings in the ECM when you go to program it. So if it showed you they are disabled then that is how they are unless you change them. If you want to change them you would select what you want then <click> on the change button. Remember that what you want is for it to show enabled to have the ACR's working.