Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: ECM and Power Commander  (Read 3601 times)

0 Members and 1 Guest are viewing this topic.

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: ECM and Power Commander
« Reply #15 on: December 27, 2006, 02:00:07 PM »

Quote
[/highlight]

That may be it too.  I don't know........but I'm going to find out before I do anything else.  I just noticed Jerry's chart is dated March 2006.

Henry...whoever you order the PCIIIUSB from, just make sure they have loaded all the new firmware available, particularly the rev extender,as it will take it to 6200, even if the ECM flash did not.  With my flash, the rev limiter is still set on 5800, and I've hit it on several occasions  ;) :o
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: ECM and Power Commander
« Reply #16 on: December 27, 2006, 03:20:09 PM »

Henry,

Now that Terry mentioned the rev limit, a light bulb just popped on. [smiley=idea3.gif]  A real quick way to make sure he didn't load the "legal" instead of the "race" calibration is to run the bike up to the limiter.  If it's still at 5800, he loaded the "legal" calibration.  The "race" calibration takes it up to 6200.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

Bagger

  • Guest
Re: ECM and Power Commander
« Reply #17 on: December 27, 2006, 04:07:37 PM »

Quote
Henry,

Now that Terry mentioned the rev limit, a light bulb just popped on. [smiley=idea3.gif]  A real quick way to make sure he didn't load the "legal" instead of the "race" calibration is to run the bike up to the limiter.  If it's still at 5800, he loaded the "legal" calibration.  The "race" calibration takes it up to 6200.

Jerry

Alrighty then.  I must have the race calibration as my rev limit is 6200rpm.  I've only hit it once, and that was just to see if it worked.  [smiley=xyxthumbs.gif]
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: ECM and Power Commander
« Reply #18 on: December 29, 2006, 01:06:47 AM »

Quote

Alrighty then.  I must have the race calibration as my rev limit is 6200rpm.  I've only hit it once, and that was just to see if it worked.  [smiley=xyxthumbs.gif]

Power commander says NOT to use the rev x-tend feature if you have the rev limit at 6200 set in the ECM.

Bagger

  • Guest
Re: ECM and Power Commander
« Reply #19 on: December 29, 2006, 07:09:14 AM »

Quote

Power commander says NOT to use the rev x-tend feature if you have the rev limit at 6200 set in the ECM.

  :) :);D ;D  Ya think????????? ;D ;D :) :)
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50554
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: ECM and Power Commander
« Reply #20 on: December 29, 2006, 10:43:50 AM »

Quote

Power commander says NOT to use the rev x-tend feature if you have the rev limit at 6200 set in the ECM.


That actually begs a question.  Is that recommendation because it would be wholly redundant and unnecessary offering no gain?  Or is it because it ups the RPM limit from whatever the baseline is?
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: ECM and Power Commander
« Reply #21 on: December 30, 2006, 01:08:36 AM »

Quote


That actually begs a question.  Is that recommendation because it would be wholly redundant and unnecessary offering no gain?  Or is it because it ups the RPM limit from whatever the baseline is?

Not sure why [smiley=nixweiss.gif] The manual just says not to do it if you have the HD stage 1 or 2 flash done to the ECM.

I was just pointing it out so it was not requested or ordered that way if you had the stage 1 or 2 download. You can turn the feature on and off however.

displacing air

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 922
  • I am glad God answers no sometimes!
Re: ECM and Power Commander
« Reply #22 on: December 30, 2006, 08:43:21 AM »

I have one that wasnt on the list?  Part# 34303-06/dt
Its a stage one download for the 103 and puts revs at 6200.
I thought the dt at the end stands for Dig. Tech. ?

Barry
Logged
2006 SEUC ...Watermelon Flavor!

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: ECM and Power Commander
« Reply #23 on: December 30, 2006, 09:12:50 AM »

Quote
I have one that wasnt on the list?  Part# 34303-06/dt
Its a stage one download for the 103 and puts revs at 6200.
I thought the dt at the end stands for Dig. Tech. ?

Barry
Barry,

You're correct, the DT at the end signifies it is a Digital Technician download, as opposed to a cartridge.  As for the 34303-06 part not being on the list I posted, that's not unusual.  That bulletin was put out by H-D after they went to the 25° injectors on all Twin Cams, and may not have all calibrations listed.    

If anyone seriously questions whether they have the correct calibration or not, have a dealer hook the bike up to Digital Tech.  Based on your VIN, it will only bring up calibrations which apply to your specific model (ie. Stock, Stage 1 Legal, Stage 1 Race).  My understanding is that on '07's it will only have the Stock and Legal downloads, with all "Race" calibrations available only with the SERT.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

displacing air

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 922
  • I am glad God answers no sometimes!
Re: ECM and Power Commander
« Reply #24 on: December 30, 2006, 09:56:51 AM »

Thanks Jerry...

Barry
Logged
2006 SEUC ...Watermelon Flavor!

Bagger

  • Guest
Re: ECM and Power Commander
« Reply #25 on: March 03, 2007, 06:53:14 PM »

Renea and I rode up to HD of Columbia today and had Moose put the DT on my scoot.  I have 34303-07 Stage 1 Race.
Logged
Pages: 1 [2]  All
 

Page created in 0.241 seconds with 25 queries.