Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Poopy]

before with Halogen

[2018_FLTRXSE]

I also just had the 30-T Sprocket swapped on my 11' Street Glide. The lower gearing is perfect for my style of riding. Quick as a cat. I bought the TTS Mastertuner with the Stage II Kit from Fullsac with the Woods 555 Night Prowler Cams & 2.25" Cores. Had all the work done at one time. Needles to say, my SG does not sound and perform like a Vespa anymore! LOL

The Speedo Correction on my bike was 2251.

Now I'm heading in my garage to swap out the Halogen Headlight for the New Black LED Headlight. I will post pics ASAP

After this weekends ride, I noted that the wifes Road King showed about a 5 mile difference on the trip meter after the days ride. (95 miles)

I took a look at my correction factor and I had incorrectly entered the tire size. The 180/55-18" tire is slightly taller than the 180/65-16.. making the speedo read slower than actual road speed.

The correct speedo ciorrection factor with the 30T and the 180/55-18 is 2251.

Thanks to Poopy for posting this up.

[Chilly]

  I'm thinking of doing this up-grade to my 2010 seuc. The only thing I've done to my bike is a Fullsac header pipe and 2.5" rush mufflers. I do have a tts unit but,
  haven't installed yet. I do a  lot of 2up riding mainly in Michigan, any other advice would be appreciated.      Chilly

[2018_FLTRXSE]

  I'm thinking of doing this up-grade to my 2010 seuc. The only thing I've done to my bike is a Fullsac header pipe and 2.5" rush mufflers. I do have a tts unit but,
  haven't installed yet. I do a  lot of 2up riding mainly in Michigan, any other advice would be appreciated.      Chilly

You will love it....

[catahoula58]

I'm thinking of doing this 30T upgrade along with the 2.00" fulsacs baffles and the TTS and the Andrews 54 cams got the new SE compensator also.  Currently got the primary open for the install of the new SE compensator and was curious what this 30T will do to the gas mileage?  Should I get the Woods 555 cam in lieu of the Andrews 54 along with the 30T?  Any input would be appreciated!

Thanks

[Robmay]

I tried this on my 2010 ultra back in the summer of 2010. We couldn't find the right belt fro the job. I have a 2011 RG now. Will this work on the 2011 with the same parts? I did this to my 2007 SECUSE and it was one of the best mods I made on that bike. Just made my speedo off a bit. With the TTS now I could recalibrate that if I can do it to my newest bike.

[Poopy]

go to www.fullsac.com or call Steve at 925-505-2912 or email him at info@fullsac.com

He will help you immensely!

[2018_FLTRXSE]

I'm thinking of doing this 30T upgrade along with the 2.00" fulsacs baffles and the TTS and the Andrews 54 cams got the new SE compensator also.  Currently got the primary open for the install of the new SE compensator and was curious what this 30T will do to the gas mileage?  Should I get the Woods 555 cam in lieu of the Andrews 54 along with the 30T?  Any input would be appreciated!

Thanks

I havent noticed a drop in mileage.... except that I tend to enjoy the throttle even more... so yeah..

Depending on your riding style the 555 will give you more on the top end, but to be honest, the 54's are perfect for in the zone riding....

I finally got the laptop out to the bike this evening and corrected speedo error (I forgot to calculate for the 18" rear tire) with the TTS. correction factor is 2251 ( I think) for the 09 SERG with the 30T conversion.

I'll ride it for a week and see exactly where I am.

[Robmay]

go to www.fullsac.com or call Steve at 925-505-2912 or email him at info@fullsac.com

He will help you immensely!

Done. Thanks!

[BADBAGG]

  I see that you are referencing a Harley trans pulley that is (indeed) a 30toother.  As you say,  it's for the 2011 Tri Glide.   Now,  I understand I can go to Andrews or Baker and get a 30 tooth Trans sprocket(pulley),  but this HD one may be an alternative.

However,  the Tri Glide uses a 1 1/8" belt while my '09 Ultra uses a 1" belt............so I'm interested as to whether the Tri Glide pulley will work and fit on my '09 Ultra if I get the cooresponding (one tooth less) Drag Specialties 139 tooth 1" belt to complete the package

Since the picture (in HD parts diagrams) shows (no) lip on that pulley on the outer side,  question is will it fit and will it work with a 1" belt.
[/quote

Intsalled the tri-glide pulley and drag belt on my 09 fltrse3. no issues. def worth doing.

[RayG]

It appears that obtaining a complete kit from Steve @ Fullsak is still a ways off.  I tried to keep my business with those who help us on the CVOForum.  I called a few suppliers and they are talking May before the sprockets are available.  I see a few have used the wider one from HD that was for the Trike, does anyone see a potential problem down the road using the wider sprocket?  My bike is all apart and ready for the install, I would hate to put it all back together and do it over again in May or June.  It's been a long winter and I'm looking forward to my first long ride.  Could someone supply me with the correct HD part numbers for the sprocket and belt.  I will call it in along with the SE Compensator with one of our 20% vendors.  

I really appreciate the help.

Thank You

Ray G.

[HOGMIKE]

It appears that obtaining a complete kit from Steve @ Fullsak is still a ways off.  I tried to keep my business with those who help us on the CVOForum.  I called a few suppliers and they are talking May before the sprockets are available.  I see a few have used the wider one from HD that was for the Trike, does anyone see a potential problem down the road using the wider sprocket?  My bike is all apart and ready for the install, I would hate to put it all back together and do it over again in May or June.  It's been a long winter and I'm looking forward to my first long ride.  Could someone supply me with the correct HD part numbers for the sprocket and belt.  I will call it in along with the SE Compensator with one of our 20% vendors.  

I really appreciate the help.

Thank You

Ray G.

The pulley is 83595-11 the belt is from Drag, 139T, sorry, don't have the part # for that.
Drag, Baker, Andrews all have the pulleys, price varies.
I'm using the H-D one and Drag belt, so far about 5000 miles on the setup and it's working just fine!
 FWIW: I also used one of the members here for my purchase. Fullsac. Ordered on Monday, received on Wednesday. 

[Robmay]

It appears that obtaining a complete kit from Steve @ Fullsak is still a ways off.  I tried to keep my business with those who help us on the CVOForum.  I called a few suppliers and they are talking May before the sprockets are available.  I see a few have used the wider one from HD that was for the Trike, does anyone see a potential problem down the road using the wider sprocket?  My bike is all apart and ready for the install, I would hate to put it all back together and do it over again in May or June.  It's been a long winter and I'm looking forward to my first long ride.  Could someone supply me with the correct HD part numbers for the sprocket and belt.  I will call it in along with the SE Compensator with one of our 20% vendors.  

I really appreciate the help.

Thank You

Ray G.

You can still get a belt from him and a gear from Andrews. I just got a belt from him (ordered) yesterday. I already had the gear (which is on back order thru him I believe).

[moscooter]

 
The part # I have for Drag Specialties 1" (139T) belt is p/n 1204-0064.

My HD dealer just got one in for me as well as the SE comp.  the tri-glide 30T pulley is on back order.  They are tracking delivery for me now.

[Robmay]

I have a belt and pulley for sale if anyone needs the set up. PM me for details.