Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Cvostu]

I am really happy with these cams.  Numbers are great.   Smooth as can be.

[Yellow09SERG]

Phil, is that with a 50mm or 58mm TB?

[Ohio phil]

Yes stock injectors and throttle body, John did cleaned it up, This thing pulls good from 2500 to 5800 rpm with no hiccups, smooth from 0 mph on I road about 100 miles last night 75 miles 2 up thanks every body, John at Torque Inc. was a 2 week turnaround.

C-YA Ohiophil

[Yellow09SERG]

Wonder how a 58 would change it?

[TorqueInc]

  In phils case

  Probably not a lot

  If someone brought me a T-hog or a SE-58 or an HPI 55-58

  I would have suggested different work be done and why

  His heads got minimal portwork,new exhaust valves and guides (exhaust valves were pitted ,one real bad the other was useable)

    As well as a set of beehives.

[Yellow09SERG]

John or Phil,  was the intake valve size changed or left stock? 

[TorqueInc]

   Stock...2.08"

[Ridgerunr]

"As well as a set of beehives."

Don't HD heads have beehives to begin with? 24D bolt in?

[TorqueInc]

  The 110 engines do not have beehives

[Ridgerunr]

  The 110 engines do not have beehives

Thank You.
Then knowing HD, the springs are likely overkill that come in them. I remember the 195# springs that came in HTCC CNC heads, hard on the equipment.

[TorqueInc]

  Phils are 165/167 seat and 380/383 open

  Bout where I like em