Topic: Freedom Wings (Read 6098 times)

110tHunDer · « **on:** June 11, 2005, 11:04:43 PM »

Here's a product getting some good reviews on another website (Harley Electra Glide Garage). They're called Freedom Wings and look like they might be a good option for those both seeking relief from the heat and protection from the cold and/or rain. Just thought I'd pass along for what it's worth. Here's a link to their site: Freedom Wings

mw8385 · « **Reply #1 on:** June 12, 2005, 01:02:42 AM »

Quote

What about interference with the tank, neck, etc. on tight turns?

No interference at all. I would suggest using some teflon washers were they attach to the fairing. The brackets will scratch the paint.

Twolanerider · « **Reply #2 on:** June 12, 2005, 01:21:54 AM »

At least in concept I like those alot. How "closed" do they close and how well do they stay closed going down the road at either moderate (or even immoderate) speeds?

mw8385 · « **Reply #3 on:** June 12, 2005, 01:46:23 AM »

I put a set on my bike and they work great! Keeps the wind off of you when adjusted flat and when you turn them in it brings cool air into your arms and chest.

JCZ · « **Reply #4 on:** June 12, 2005, 01:58:08 AM »

Quote

I put a set on my bike and they work great! Keeps the wind off of you when adjusted flat and when you turn them in it brings cool air into your arms and chest.

What about interference with the tank, neck, etc. on tight turns?

mw8385 · « **Reply #5 on:** June 12, 2005, 02:29:58 PM »

They stayed closed for me at over 100mph! There are screws that you can tighten to keep them in place. Here are a few pics but please excuse the dirty bike!

mw8385 · « **Reply #6 on:** June 12, 2005, 02:30:50 PM »

Pic 2

mw8385 · « **Reply #7 on:** June 12, 2005, 02:31:21 PM »

Pic 3

mw8385 · « **Reply #8 on:** June 12, 2005, 02:32:01 PM »

Pic 4

Rsantucc · « **Reply #9 on:** June 12, 2005, 03:16:38 PM »

LOve they way they look. Juts ordered a set. Tell me what size teflon washers would you need. Also will the washers loosen the bolts once they are installed?

JCZ · « **Reply #10 on:** June 12, 2005, 04:34:43 PM »

Somebody should approach them about a CVO Owner's Site discount. Explain that we'll post an "ad" in our "for Sale" forum and that it will stay there as long as they're willing to offer something like a 10% discount for members of this site.

Elvis · « **Reply #11 on:** June 12, 2005, 05:32:33 PM »

I think I like the Freedom Wings better but here's the competition, if anybody's researching these.

http://www.kuryakyn.com/products.asp?bn=harley&ci=3351

Coolbreeze · « **Reply #12 on:** June 13, 2005, 02:21:44 PM »

How cool is that! I just ordered a set... I'm hoping it will stop the buffeting I get from trucks and such when I open them up... I'll let ya'll know how that works out... [smiley=xyxthumbs.gif]

Dr. Evil · « **Reply #13 on:** June 13, 2005, 02:54:23 PM »

And it'll be like a sailboat at top speed guys... be careful.
I suspect the buffeting etc could be worse.

pappy2 · « **Reply #14 on:** June 13, 2005, 03:16:52 PM »

I actually think the reflective Kuryakyns would look good on the screamin chicken. I will stop by the local K dealer and take a look. This is a great idea for those of us in hot climates. Thanks [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif]

Coolbreeze · « **Reply #15 on:** June 13, 2005, 05:40:01 PM »

Quote

I actually think the reflective Kuryakyns would look good on the screamin chicken. I will stop by the local K dealer and take a look. This is a great idea for those of us in hot climates. Thanks [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif]

Could ya take a picture of it while you're there? The picturye on the K page is REAL vague.... I couldn't even figure out what it's made of...

JCZ · « **Reply #16 on:** June 13, 2005, 09:15:01 PM »

Quote

I actually think the reflective Kuryakyns would look good on the screamin chicken. I will stop by the local K dealer and take a look. This is a great idea for those of us in hot climates. Thanks [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif]

I'd be interested in seeing a couple better pictures of the Kuryaken ones look like.....especially on a SEEG.

bubbarosa · « **Reply #17 on:** June 14, 2005, 02:52:15 PM »

I just installed these freedom wings... absolutely great.... cut most of the crosswind from the driver. They stay adjusted at any speed my stock bike can manage. And they look nice!

Tony - www.1700cc.co.uk · « **Reply #18 on:** June 14, 2005, 03:53:17 PM »

Quote

Here's a link to their site: Freedom Wings

103,

That is hugely useful, thank you. I was just missing the stock ones that were on the Ultra and was considering adding them.

I will await everyone's comments before choosing now. [smiley=beerchug.gif]

JCZ · « **Reply #19 on:** June 14, 2005, 09:44:09 PM »

Quote

I just installed these freedom wings... absolutely great.... cut most of the crosswind from the driver. They stay adjusted at any speed my stock bike can manage. And they look nice!

Bubba did you put on the ones from Kuryaken? [smiley=worthless.gif]

Rsantucc · « **Reply #20 on:** June 15, 2005, 09:43:17 PM »

Here are a few shots of the freedom wings I just put on tonight. It took me less the 15 minutes and a Michlobe Ultra, but it took me an hour to go to Home Depot and get teflon washers to put between the braket and the painted fairing. Highly reccomended to use Teflon or rubber washers when adding wings to the bike since the SEEG's are painted

Enjoy!

Rsantucc · « **Reply #21 on:** June 15, 2005, 09:44:06 PM »

Right Side wing opened

Rsantucc · « **Reply #22 on:** June 15, 2005, 09:44:40 PM »

Right side wing closed

Rsantucc · « **Reply #23 on:** June 15, 2005, 09:45:51 PM »

Left Side closed

Rsantucc · « **Reply #24 on:** June 15, 2005, 09:47:24 PM »

Left side open

hd2003-se2005 · « **Reply #25 on:** June 15, 2005, 10:10:30 PM »

Quote

I just installed these freedom wings... absolutely great.... cut most of the crosswind from the driver. They stay adjusted at any speed my stock bike can manage. And they look nice!

So Bubba the wings are good up to 140?
Very fine,,, and they look nice!

110tHunDer · « **Reply #26 on:** June 15, 2005, 10:11:01 PM »

Rsantucc, I elected to delete your other separate thread with the photos only since they were exact duplicates of these.

Chip, sorry, but your response also got deep-sixed.

Just trying to avoid duplicate threads. Thanks for your understanding!

hd2003-se2005 · « **Reply #27 on:** June 15, 2005, 10:15:49 PM »

RSANTUCC

Don't be alarmed, but your saddlebag is missing! [smiley=shocked2.gif]

And 103T
"Chip, sorry, but your response also got deep-sixed."

103T----> [smiley=sauer007.gif]<-----HD2003

[smiley=sauer019.gif]

110tHunDer · « **Reply #28 on:** June 15, 2005, 10:25:06 PM »

Quote

103T----> [smiley=sauer007.gif]<-----HD2003

[smiley=sauer019.gif]

[smiley=laugh.gif]

Rsantucc · « **Reply #29 on:** June 15, 2005, 10:57:07 PM »

Quote

RSANTUCC

Don't be alarmed, but your saddlebag is missing! [smiley=shocked2.gif]

And 103T
"Chip, sorry, but your response also got deep-sixed."

103T----> [smiley=sauer007.gif]<-----HD2003

[smiley=sauer019.gif]

Have the bag off due to a rock comeing ip and chipping the paint of the bag just near the support bar, its the size of 1/4 of a dime. I have been in touch up mode with that bag now for 3 days. The reuslts are it came out pretty dam good just waiting for the top coat to dry before I sand one more time and pit a second coat on of the touch up paint. I will try to post pictures if I don't forget

lvrider · « **Reply #30 on:** June 15, 2005, 11:15:42 PM »

The freedom wings sure look good on the bike. Has anyone approached the dealer to see if they'll offer a discount to members of this site?

h82lose · « **Reply #31 on:** June 21, 2005, 08:41:13 AM »

does anyone know the size of the bolt that goes into the inner fairing to hold on the wings as i have a set coming in and want to get the bolts to install them. [smiley=confused5.gif] [smiley=confused5.gif] [smiley=nixweiss.gif] [smiley=drink.gif] [smiley=beerchug.gif]

Coolbreeze · « **Reply #32 on:** June 21, 2005, 11:10:11 AM »

I believe the screws are 10/32 screws X 3/4" long, but I will check for sure at lunch and post the result... The Harley wings came with the screws, but the freedom wings did not have them. Nice quality item too, they look just about like the harley item, but the functionality is head and shoulders above... [smiley=huepfenjump3.gif]

DavidB · « **Reply #33 on:** June 21, 2005, 05:22:21 PM »

Quote

What about interference with the tank, neck, etc. on tight turns?

Caution / If the wings are opened really wide they will contact the tank when the bars are swung full left to lock the forks.

Dont ask how I know [smiley=oops.gif]

jmorton10 · « **Reply #34 on:** June 21, 2005, 07:38:22 PM »

Quote

I believe the screws are 10/32 screws X 3/4" long, [smiley=huepfenjump3.gif]

If I remember right, those screws are 10/24

~John

mw8385 · « **Reply #35 on:** June 21, 2005, 09:46:39 PM »

Quote

If I remember right, those screws are 10/24

~John

jmorton10 is correct. The package states to use the 10-24 x 3/4" screw.

Twolanerider · « **Reply #36 on:** June 22, 2005, 01:39:01 AM »

I've got a set of these things on the way too. Just noticed this thread.

Already had the cheap little solid piece HD "wings" mounted but these things just looked so much more functional when I saw them. One hint from my own experience mounting the other type. Before you put them go down to the plumbing section at Lowes or Home Depot (or wherever) and get some of those hard plastic/rubber faucet washers of a size to match the screws. Use them as an insulator between the wing mount and the inner fairing. Saves your paint.

fxdjerry · « **Reply #37 on:** June 22, 2005, 10:08:54 PM »

I have to stop reading this site it is costing me money. You guys are finding all the trick parts. I ordered a set of wings and a set of screws today. Will have to get rubber washers. The guy I spoke with is JIM they have great customer service. Called my house after I placed order online and said parts were on the way. I gave him this web site. He said that his company will be at Surgis this year. I'll bet he might do a group buy.

110tHunDer · « **Reply #38 on:** June 22, 2005, 10:24:29 PM »

Quote

I have to stop reading this site it is costing me money. You guys are finding all the trick parts.

LOL, Jerry! You are not alone (see my signature) . . . .

Twolanerider · « **Reply #39 on:** June 22, 2005, 11:53:40 PM »

Quote

I have to stop reading this site it is costing me money. You

Don't feel alone Jerry. I only had a small pile of parts already picked out before the bike arrived; then I found this site....... You'll find that everyone here is mean, evil, diabolical and tempting of all sorts of evil parts and accessories.

BLM777 · « **Reply #40 on:** June 23, 2005, 06:15:11 AM »

Quote

Don't feel alone Jerry. I only had a small pile of parts already picked out before the bike arrived; then I found this site....... You'll find that everyone here is mean, evil, diabolical and tempting of all sorts of evil parts and accessories.

You'll also find that the members on this site are also not "wrapped too tight" as evidenced by a million dollars worth of bikes sitting in the parking lot at Maggie Valley, rain coming down in buckets and everybody smiling, laughing and having a great time. What a "shrinks dream" this place is!!!!
[smiley=nervous.gif]

Twolanerider · « **Reply #41 on:** June 23, 2005, 11:33:40 AM »

Quote

You'll also find that the members on this site are also not "wrapped too tight" as evidenced by a million dollars worth of bikes sitting in the parking lot at Maggie Valley, rain coming down in buckets and everybody smiling, laughing and having a great time. What a "shrinks dream" this place is!!!!
[smiley=nervous.gif]

But BLM, we were all drinking Mike's beer. Of course we were having a good time [smiley=xyxthumbs.gif]

Three cheers for Mike from Texas !!

By the way, he should be up in the Sturgis area for a ride with some buddies right now. There's a chance I'll get to see him Saturday in Topeka. He was hoping to stop by the Kansas state rally there on his home from the Dakotas.

Rsantucc · « **Reply #42 on:** June 23, 2005, 12:59:25 PM »

Quote

does anyone know the size of the bolt that goes into the inner fairing to hold on the wings as i have a set coming in and want to get the bolts to install them. [smiley=confused5.gif] [smiley=confused5.gif] [smiley=nixweiss.gif] [smiley=drink.gif] [smiley=beerchug.gif]

Have to order the bolts seperately. They are cheap like bag for $1 dollar

JCZ · « **Reply #43 on:** June 23, 2005, 01:11:36 PM »

Has anybody ordered the wings from Kuryaken yet?

Twolanerider · « **Reply #44 on:** June 23, 2005, 03:22:27 PM »

Quote

Has anybody ordered the wings from Kuryaken yet?

My Freedom Wings arrived in the mail today. Got to put them on real quick this evening before leaving for Topeka in the morning. What's Kuryakyn got?

Coolbreeze · « **Reply #45 on:** June 23, 2005, 04:21:30 PM »

10/24 X 3/4 is what I have in the holes on mine.... (10/32 was wrong...)

pfatmn · « **Reply #46 on:** July 05, 2005, 02:21:21 PM »

I just put a pair of freedom wings on my ride. About 200 miles later my right side wing came off. I didnt notice untill I got where I was going . To bad for me. The wings are great and may have come off because someone messed with them or my own error. I recommend everyone loctite the screws to avoid the problem.(I had faucet washer in place) Also please note I called Freedom wing and talked to JIM he was great and the co is sending me out my missing wing at a special price. Tehse are good people with a good product.

[smiley=bigok.gif]

05yellowse · « **Reply #47 on:** July 05, 2005, 04:22:01 PM »

I found a set at a HD dealer in northern Ca. The shop foreman had a CVO and bought extra sets for anyone who might want a set,Its one of the best purchases I have added.Helps when it rains and when going through a lot of hot weather. He told me to install finger tight,I ended up putting the ole wrench to it and they never cam loose,I also tightened up the screws on the wing itself to make it more difficult to turn. Have had no problems at all.

Twolanerider · « **Reply #48 on:** July 05, 2005, 05:51:02 PM »

The red bike's have been on about 800 miles now. Work great with no wobble or problem with them not staying where you put them. Wouldn't have worried about them coming loose if you hadn't had a problem. Now I'll have to go check so it doens't bug me [smiley=drink.gif]

JR · « **Reply #49 on:** July 05, 2005, 06:55:33 PM »

Quote

Has anybody ordered the wings from Kuryaken yet?

Hey JC [smiley=beerchug.gif]

I have had those puppies on back order since April! End of May I was told should be in by June. Just called again today and dude at m&m had 3 other calls today, the one before me came from England ,thought of Tony. Anyway he is suppose to be emailing me when they are shipped to him. Will get some pics for ya when and if I ever get them.

He offered me my money back and I told him No worries mate (sorry just watched crocidile dundee) If it's not you I'm not worried about it. Then I ran across this thread and thought maybe I should get my money back and get these. But I think I will hold out for the Kuryakyns.

If I don't like them I will get the freedom wings and mount the Kuryakyns on my weed eater! [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif]

See Ya, Bless Ya, JR [smiley=laugh.gif]

Coolbreeze · « **Reply #50 on:** July 05, 2005, 07:01:48 PM »

Hey J.Rud
Let me know if you decide that you don't like them. I'll probably take them off your hands for you. I think I like the looks of them, but I didn't want to wait so I went with the Freedom Wings....

110tHunDer · « **Reply #51 on:** July 05, 2005, 08:04:59 PM »

It's good to hear the positive stories on the Freedom Wings. [smiley=thumbsup.gif] I kinda figured the guys at the Electra Glide Garage would know what they're talking about. [smiley=beerchug.gif]

JCZ · « **Reply #52 on:** July 05, 2005, 08:39:28 PM »

Quote

Hey JC [smiley=beerchug.gif]

I have had those puppies on back order since April! End of May I was told should be in by June. Just called again today and dude at m&m had 3 other calls today, the one before me came from England ,thought of Tony. Anyway he is suppose to be emailing me when they are shipped to him. Will get some pics for ya when and if I ever get them.

He offered me my money back and I told him No worries mate (sorry just watched crocidile dundee) If it's not you I'm not worried about it. Then I ran across this thread and thought maybe I should get my money back and get these. But I think I will hold out for the Kuryakyns.

If I don't like them I will get the freedom wings and mount the Kuryakyns on my weed eater! [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif] [smiley=laugh.gif]

See Ya, Bless Ya, JR [smiley=laugh.gif]

Thanks JR, thank I'll hold out till I see pictures of yours (from Kuryaken).

JCZ · « **Reply #53 on:** July 05, 2005, 08:40:49 PM »

Quote

I found a set at a HD dealer in northern Ca. The shop foreman had a CVO and bought extra sets for anyone who might want a set,Its one of the best purchases I have added.Helps when it rains and when going through a lot of hot weather. He told me to install finger tight,I ended up putting the ole wrench to it and they never cam loose,I also tightened up the screws on the wing itself to make it more difficult to turn. Have had no problems at all.

05 do you remember which dealership it was that you bought them from? Or which town?

Twolanerider · « **Reply #54 on:** July 05, 2005, 09:58:28 PM »

Quote

Thanks JR, thank I'll hold out till I see pictures of yours (from Kuryaken).

JC,
On Kuryakyn's site this is the only thing I could find. From this photo it's difficult to tell how or where they open and adjust. The description, however, says that they do [smiley=nixweiss.gif]

http://www.kuryakyn.com/products.asp?bn=Harley&ci=3351

In general appearance these look better and more "finished" than the adjustable wings I got a couple weeks ago. These others work fine. But the Kuryakyn piece looks better. Also looks like it attaches to the fairing with all three screws where there other pieces attach only with two. Had I known about these Kuryakyn goodies I'd likely not have ordered the ones I did. Oh well, not the first time that's happened [smiley=nixweiss.gif]

pappy2 · « **Reply #55 on:** July 05, 2005, 10:58:27 PM »

Hey JR, did you order the smoke or mirrored ones? I think the mirror might look nice but will wait for some pics as well. I love the other stuff I copied off your bike so these will be just one more item in common. Be safe. JP [smiley=drink.gif]

JCZ · « **Reply #56 on:** July 05, 2005, 10:59:21 PM »

Thanks a bunch, Don! [smiley=xyxthumbs.gif]

grc · « **Reply #57 on:** July 05, 2005, 11:01:19 PM »

Quote

JC,
On Kuryakyn's site this is the only thing I could find. From this photo it's difficult to tell how or where they open and adjust. The description, however, says that they do [smiley=nixweiss.gif]

http://www.kuryakyn.com/products.asp?bn=Harley&ci=3351

In general appearance these look better and more "finished" than the adjustable wings I got a couple weeks ago. These others work fine. But the Kuryakyn piece looks better. Also looks like it attaches to the fairing with all three screws where there other pieces attach only with two. Had I known about these Kuryakyn goodies I'd likely not have ordered the ones I did. Oh well, not the first time that's happened [smiley=nixweiss.gif]

The pictures on the Kuryakin site leave a lot to be desired, but the instruction sheet gives a description of how they operate.

110tHunDer · « **Reply #58 on:** July 05, 2005, 11:22:44 PM »

Quote

The pictures on the Kuryakin site leave a lot to be desired, but the instruction sheet gives a description of how they operate.

Now I understand where they get their name. Thanks, grc. I'm not sure they would look very appealing deployed. If I'm reading it right, they would only be attached at the lower point. It would be very "dragon wing" looking, but I'm not so sure that's a good thing. [smiley=nixweiss.gif]

Twolanerider · « **Reply #59 on:** July 06, 2005, 01:47:49 AM »

Quote

Now I understand where they get their name. Thanks, grc. I'm not sure they would look very appealing deployed. If I'm reading it right, they would only be attached at the lower point. It would be very "dragon wing" looking, but I'm not so sure that's a good thing. [smiley=nixweiss.gif]

Dragonfly wing kinda thing? That would be funky [smiley=nixweiss.gif] . I think I'm liking my new ones better and better all the time . [smiley=beerchug.gif]

mr_magoo · « **Reply #60 on:** July 06, 2005, 01:54:31 AM »

The kuryakan one look like the frame stays put and a portion moves like a wing window. the freedom wings the hole wing moves.

JR · « **Reply #61 on:** July 06, 2005, 07:33:55 AM »

Quote

Hey JR, did you order the smoke or mirrored ones? I think the mirror might look nice but will wait for some pics as well. I love the other stuff I copied off your bike so these will be just one more item in common. Be safe. JP [smiley=drink.gif]

Hey Pappy,

Actually, I went with the smoked to go with the smoked windshield. I liked the mirror ones but not sure how they would look on the bananna. Will take pictures if they ever come in!

JR [smiley=laugh.gif]

Author Topic: Freedom Wings (Read 6098 times)

hd2003-se2005

hd2003-se2005