talon- where did you get the cover for that set up?
The outer cover is just a Joker air cleaner insert, I took the raw metal inner cover that came with the Power Pacc air cleaner and had it powder coated black, cost me $10 to have it coated since the local guy does this gloss black all the time. Someone else on this site did this first, that's where I got the idea. Can't remember who, but he had his done to match his bike, i think it was a Jalapeno. So you can pick any air cleaner insert you like, as long as it doesn't require special brackets to mount it.
P.S. One other thing, I made a spacer to go behind the air cleaner cover where the bolt goes through, there is a gap and if you tighten it to much without anything in between toy could bend the inner cover. I just put some modeling clay on the back side of the chrome cover, sprayed a little lube on the black cover around the bold hole, tightened it until it was snug and then removed and measured the thickness of the clay. You could also just use several washers, but my buddy has a lathe and a mill so we just made a spacer.