How'd you go about doing the paint? Looks good.
First I removed the little black plastic pieces out of the grooves, they popped right out with an eyeglass screwdriver. Then I covered the insert with painters tape and cut out the grooves with an exacto knife and sprayed them with the rustoleum cobalt blue metallic. This did pretty good but the tape had creeped into the edges of the grooves a little bit in some places. So I gave them one more coat without any tape on them at all and immediately wiped the chrome surface with a paper towel dampened with nail polish remover. There are still some places that could use a little touch up so I am thinking about getting a pinstriping brush, spraying the brush and doing the touch up, with the nail polish remover at the ready.