www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: Hawg on September 06, 2009, 07:04:13 PM
-
Has anyone removed the International tail light? Is there another smaller and better looking one that can bolt on in it's place? Can the signal lenses be changed to a clear or red lens?
-
This may work....it worked on my 06 SG to remove the tailight and conventional directionals. Not really sure what to do with the big LED's :confused5:
http://www.cyclevisions.com/road-rod-conversion-kit/eliminator/eliminator-tail-light-assembly-for-flh-cv4800/
-
This may work....it worked on my 06 SG to remove the tailight and conventional directionals. Not really sure what to do with the big LED's :confused5:
http://www.cyclevisions.com/road-rod-conversion-kit/eliminator/eliminator-tail-light-assembly-for-flh-cv4800/
Thanks :(Not the look I am looking for. I may just have to get my body man buddy to fill in the holes and match the paint. I would think the signal lenses can be changed to the stock USA lenses easy enough.
-
Didn't know where you wanted to go with it....... :oops:
-
I just don't like the big brake light they throw on the bike for us Canadians, prefer the American look. :nixweiss:
-
I just don't like the big break light they throw on the bike for us Canadians, prefer the American look. :nixweiss:
What happens if you buy a bike in US and have it registered in Canada... does it have to be converted?
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
I just don't like the big brake light they throw on the bike for us Canadians, prefer the American look. :nixweiss:
Yup, they love doin' that to us over here...... ;D.......Hey Hawg, they must have sent all the Canadian bikes out West....... No sign of them down here until the first of October......... I will be notified end of NOVEMBER, as to when mine will be delivered........ GGGrrrrrrr.............. Until then, I will sit back and watch all the mods being done to the others....... :beerchug:
-
Yup, they love doin' that to us over here...... ;D.......Hey Hawg, they must have sent all the Canadian bikes out West....... No sign of them down here until the first of October......... I will be notified end of NOVEMBER, as to when mine will be delivered........ GGGrrrrrrr.............. Until then, I will sit back and watch all the mods being done to the others....... :beerchug:
I haven't seen any here yet as well, still waiting for mine too! :nixweiss: Ordered a Capt'n Morgan myself hoping it comes before the snow. :givemebeer: :drink:
-
I just don't like the big brake light they throw on the bike for us Canadians, prefer the American look. :nixweiss:
HD and Kuryakyn make a laydown light to replace the stock part. I've seen one on the 09 SERG and looks good (compared to stock).
http://www.kuryakyn.com/index.cfm/go/Home.ProductDetail/IMID/1727
-
http://www.cvoharley.com/smf/index.php?topic=40825.0 (http://www.cvoharley.com/smf/index.php?topic=40825.0)
Oh my god, I'm not happy about this, they don't mention screwing up the back end
-
I haven't seen any here yet as well, still waiting for mine too! :nixweiss: Ordered a Capt'n Morgan myself hoping it comes before the snow. :givemebeer: :drink:
SEEN ONE TODAY IN MONTREAL SPICED RUM
-
Has anyone removed the International tail light? Is there another smaller and better looking one that can bolt on in it's place? Can the signal lenses be changed to a clear or red lens?
Having the same nightmares... but I think i have it figured out.
Was just over to a US dealer and noticed that the US bike brake/running/turn signals are actually smoked grey but shine red. Part number 69383-09 (left) and 69407-09 (right). They are the whole light assembly and will swap out for our amber ones... a little pricey though...$195 each
Step 2 get a Layback smoked grey lense for the canadian tail lamp.... I think it will all blend together nicely
At least it all looks like it belongs
-
If you do swap out the LED's you need a new harness 70338-09 as the HDI one only runs the turn signals.
Kev
-
Having the same nightmares... but I think i have it figured out.
Was just over to a US dealer and noticed that the US bike brake/running/turn signals are actually smoked grey but shine red. Part number 69383-09 (left) and 69407-09 (right). They are the whole light assembly and will swap out for our amber ones... a little pricey though...$195 each
Step 2 get a Layback smoked grey lense for the canadian tail lamp.... I think it will all blend together nicely
At least it all looks like it belongs
Going through the same problem on my serg, if you oder through Jenni you will save 20%.
-
Here is my solution , the plate will get the three colours titanium dust as ground the eagle line in gold and the insert of the eagle black , the "Screaming eagle" black or gold .
-
Having the same nightmares... but I think i have it figured out.
Was just over to a US dealer and noticed that the US bike brake/running/turn signals are actually smoked grey but shine red. Part number 69383-09 (left) and 69407-09 (right). They are the whole light assembly and will swap out for our amber ones... a little pricey though...$195 each
Step 2 get a Layback smoked grey lense for the canadian tail lamp.... I think it will all blend together nicely
At least it all looks like it belongs
Here is what i'm thinking. This is the CVOHarley Member's Ultra i was talking about. He made his look like the SESG but with a tail light
-
Not bad , but the most ugly thing is still there : The Taillight ::)
-
If you do swap out the LED's you need a new harness 70338-09 as the HDI one only runs the turn signals.
Kev
True enough Kevin however I was going to leave the brake light in place and just use the LED's as signals anyway... they'd just be red not amber.
I was also investigating whether the harnes from the Auxiliary Running Light / Brake Light / Turn Signal Conversion Kit - HD PN 69461-06A could be used to get all 3 lamps to light on braking?
-
HD and Kuryakyn make a laydown light to replace the stock part. I've seen one on the 09 SERG and looks good (compared to stock).
http://www.kuryakyn.com/index.cfm/go/Home.ProductDetail/IMID/1727
They also make a LED Conversion Tail lamp that has no License light and is only about 1 inch deep at the top and almost flush at the bottom.
http://www.kuryakyn.com/index.cfm/go/Home.ProductDetail/IMID/1592
-
They also make a LED Conversion Tail lamp that has no License light and is only about 1 inch deep at the top and almost flush at the bottom.
http://www.kuryakyn.com/index.cfm/go/Home.ProductDetail/IMID/1592
That`s not worth a cent , in my opinion
-
Not bad , but the most ugly thing is still there : The Taillight ::)
That is my bike, why don't just change the fender to a US fender. That would eliminate the tail light totally
-
That is my bike, why don't just change the fender to a US fender. That would eliminate the tail light totally
Yes Tracey... thank you for the idea!... the more i look at yours the more i'm actually liking the tail light. Sure the fender swap went through my mind but that one might be a little hard to sell with mama bear unless I get her at the right moment ( :drink:) ... if you know what I mean ;)
-
Yes Tracey... thank you for the idea!... the more i look at yours the more i'm actually liking the tail light. Sure the fender swap went through my mind but that one might be a little hard to sell with mama bear unless I get her at the right moment ( :drink:) ... if you know what I mean ;)
Oh yeah, yeah I know what you mean, I can't do anymore until spring. Or the dog moves inside, and give where I'll be.