Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[LTNBLT]

Hi,
First post to the site!
Anyone know who makes a 2015-2016 CVO Floorboard Extender? Talked to Kuryakyn Technical and they don't.
Ive got the EZ Brake but still want to get my floorboard closer to the foot peg for the true Barcalounger feel!
Thanks

[RGlideKid]

If you're talking about driver floorboard extenders for a 2015 RGU, that tech guy was smoking something.  I've got Kury's on my bike.

See this post:
http://www.cvoharley.com/smf/index.php?topic=102832.msg1327798#msg1327798
Go back to the Kury site and plug in for your bike and they'll come up!  PM me if you can't find it, and we'll get you a PN

The search feature on this site is your best friend, brother!   

[LTNBLT]

Thanks for clearing that up for me.
I checked the Kuryakyn website before calling and thought it was kind of strange when the guy said NO! I'm going to order a set.
I'm slowly checking off the must haves to make the bike mine.
EZ Brake done
Detachable done
Hidden Antenna's done
V&H Power Duals and Slip Ons done
Corbin Heated Seat Done
Custom Dynamics Front LED Ringz Done
Curved laydown license mount Done
Custom Dynamics rear led and triple play ordered today
Progressive 944 1" lower shocks and 1" lower front cartridges about to order
I do most of my own wrenching so I can spend more than I should on parts!
Have I missed anything?
Best,

Bob LTNBLT (That's the plate on my super custom)
 

[RGlideKid]

Thanks for clearing that up for me.
I checked the Kuryakyn website before calling and thought it was kind of strange when the guy said NO! I'm going to order a set.
I'm slowly checking off the must haves to make the bike mine.
EZ Brake done
Detachable done
Hidden Antenna's done
V&H Power Duals and Slip Ons done
Corbin Heated Seat Done
Custom Dynamics Front LED Ringz Done
Curved laydown license mount Done
Custom Dynamics rear led and triple play ordered today
Progressive 944 1" lower shocks and 1" lower front cartridges about to order
I do most of my own wrenching so I can spend more than I should on parts!
Have I missed anything?
Best,

Bob LTNBLT (That's the plate on my super custom)

Go check out this thread to see what guys are doing to their RG's:

http://www.cvoharley.com/smf/index.php?topic=103412.0

[TNCarters]

I was not sure if the OP was trying to move boards forward or out wider.  I had the 1 inch spacers on my 2011 Limited and about ground the floorboard supports in two so had to take spacers off.  I think those were the Eglide spacers.  That bike had stock suspension but would rub the boards very easily.  The 2015 apparently sits a bit higher and I rarely touch the pavement with the boards plus it has the rub bar on the floorboard.  At this point I've gotten used to my feet resting on the outer half of the floorboard plus the air filter is a bit narrower than the high flow I had on the 2011 so will probably just leave well enough alone.

[Jbbrown73]

I've put spacers from www.vtwingoodies.com on every bagger I've ever owned. If you're looking for wider these are fantastic!

[planenut]

i will second that on e glide goodies    spacers

[Cvostu]

Softbrake has them too. .

[turn_key]

I've put spacers from www.vtwingoodies.com on every bagger I've ever owned. If you're looking for wider these are fantastic!

Me as well..

[Yellow09SERG]

I've put spacers from www.vtwingoodies.com on every bagger I've ever owned. If you're looking for wider these are fantastic!

+ however many. Have them on my 09