Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All

Author Topic: Poll electronic locks  (Read 3648 times)

0 Members and 1 Guest are viewing this topic.

harlez4me

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 254
  • FLHRSEI.ORG
Re: Poll electronic locks
« Reply #30 on: February 13, 2007, 08:55:27 PM »

I went back at it tonight, but not at the power lock part, I am waiting for some small connectors for the relays I want to use.

I hooked up the Legend air suspension to a set of relays (a set from a junk car fastened to a nice bracket) that are triggered by the remaining two buttons/channels on the fob. It works awesome. I slid the relays on the bracket under the compressor on top of the swing arm. You can't see them at all.
The range that the remote works is very good. It will work farther away than the H-D transmitter works for the security. I have ran it up and down with the remote and it didn't trigger the alarm  :)
I can still operate the shocks by a micro toggle switch located in a stock hole on the plate on the frame above the starter. The weather won't allow me to go for a test ride to see if it is easier to reach down to the toggle switch or to my key ring for adjustment while riding.
I look forward to hopping off the bike an dropping the suspension in a hands free appearance.

JD

Logged
Pages: 1 2 [3]  All
 

Page created in 0.211 seconds with 21 queries.