Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[2014CVO]

The picture attached shows the type of rear turn signals I have on the bike. They are led lights (amber and red stop led). Is it possible to take the lens off as I cannot see any little divot/hole where I can pry the lens off? Also, when I get the lens off, are these leds pushed into a normal (1157) bulb hole? I would try to pry the lens off, but don’t want to damage the turn signals. The reason for all this, is I want to buy the Custom Dynamics amber/red leds, which I had on my previous bike and which are a perfect fit for my CVO. Pic of my CVO too. Thank you for any help.

[2014CVO]

Getting serviced…this is a USA bike with 1HD serial number…but maybe adjusted to fit in with Aussie laws.

[2014CVO]

I found the solution. The signals I have are specifically for Australia compliance. The USA part is 68461-09. Ordering two of these and hoping the changeover and install will be relatively easy.

[bigchuck]

It seems you answered your own question. Good luck