Topic: More handle bar help (Read 3367 times)

Twolanerider · « **Reply #15 on:** March 31, 2009, 10:46:50 PM »

Quote from: SE-Randy on March 31, 2009, 10:00:10 PM

Thanks for all the input guys! Only problem it's kind of like paint...TOO many choices. May wait until after the Eureka GTG and looking at some of your set ups. Don't mind doing this, but don't want to have to do it a 2nd time. Any of you that have done this type of mod going to Thunder on the Beach or the Eureka Springs GTG?

I'll have an 05 Electa Glide there with the Wild1 575s.

SE-Randy · « **Reply #16 on:** April 01, 2009, 08:11:31 AM »

HEY DON!! Glad you are up and around. Hope the recovery is going well. Look forward to meeting you in Eureka Springs.

Twolanerider · « **Reply #17 on:** April 01, 2009, 11:09:22 AM »

Quote from: SE-Randy on April 01, 2009, 08:11:31 AM

HEY DON!! Glad you are up and around. Hope the recovery is going well. Look forward to meeting you in Eureka Springs.

Timing should be good for riding by then without putting too much stress on the rebuilt digit. If not I'll probably ride there anyway and just hope no one stops in front of me quick enough that I grab an entire handfull of clutch without thinking about it. Could ride now. Just need to remember to pull on NOTHING with the index finger.

TallyClassic · « **Reply #18 on:** April 03, 2009, 02:45:48 PM »

Where is Thunder on the Beach?

SE-Randy · « **Reply #19 on:** April 05, 2009, 07:18:13 PM »

Quote from: TallyClassic on April 03, 2009, 02:45:48 PM

Where is Thunder on the Beach?

Sorry was out of town this weekend. It is in Panama City Beach Florida. http://www.thunderbeachproductions.com/

Brinks · « **Reply #20 on:** April 15, 2009, 06:32:40 PM »

So I'm curious, is the bar on an '09 SEUC the same as the standard '09 Ultra? If so, then the WO 575 would be a good option for a SEUC as well.

Brinks · « **Reply #21 on:** April 21, 2009, 02:43:13 PM »

Boatman · « **Reply #22 on:** April 21, 2009, 04:22:02 PM »

Quote from: Brinks on April 15, 2009, 06:32:40 PM

So I'm curious, is the bar on an '09 SEUC the same as the standard '09 Ultra?

The SEUC on an 09 should have chrome bars and the std has stainless. Don't know if they are bent the same.

Author Topic: More handle bar help (Read 3367 times)

Twolanerider

Re: More handle bar help

SE-Randy

Re: More handle bar help

Twolanerider

Re: More handle bar help

TallyClassic

Re: More handle bar help

SE-Randy

Re: More handle bar help

Brinks

Re: More handle bar help

Brinks

Re: More handle bar help

Boatman

Re: More handle bar help