Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: about to try adding Rinehart Slip ons on my stock 01 SERG headers!  (Read 506 times)

0 Members and 1 Guest are viewing this topic.

bakes

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 79

    • CVO1: 2001 serg
    • My company site
about to try adding Rinehart Slip ons on my stock 01 SERG headers!
« on: September 16, 2010, 11:09:07 AM »

wish me luck.
im currently running the stock fish tail exhaust  which I was told is really a kerker (?) and the power commander and bigger air intake, but my numbers are low I think.  76.4 HP  and 89.9 Torque, the tq peeks betweek 2.5 and 4k, so that seems good, but I think those numbers are low.  Any opinion.

PS, im really doing the muffler for the sound, but  I hope I dont loose any low end power.
Just adding the Power command to the stock setup really woke up the 95" as it is.

Bakes
Logged

110tHunDer

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14319
Re: about to try adding Rinehart Slip ons on my stock 01 SERG headers!
« Reply #1 on: September 16, 2010, 01:23:05 PM »

 
You're doing a teeny better than mine with the same setup: http://www.cvoharley.com/smf/index.php?topic=21497.0

If you're just doing slip-ons and keeping the stock head pipes, you shouldn't lose any low end and, in fact, should gain some.

Look forward to seeing your results.
Logged

bakes

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 79

    • CVO1: 2001 serg
    • My company site
Re: about to try adding Rinehart Slip ons on my stock 01 SERG headers!
« Reply #2 on: September 16, 2010, 02:32:18 PM »

I guess those figures are for your 00 serg.  Im probably going to do this within a week so ill definetly post the new figures.  here is my chart.  I wish I had dyno'd the bike when it was completely stock.
Logged
 

Page created in 0.232 seconds with 25 queries.