Topic: Hyper Lite Install and Other Additions to Henry's SEUC (Read 1820 times)

REGGAB · « **Reply #15 on:** June 01, 2007, 08:33:46 PM »

Here are the telco clamps and the flasher unit. The looped green light keeps the lights flashing constantly. If I want to change to a three flash then steady state configuration, then all I have to do is cut the green wire and bomb the ends in the event I decide to revert to the original configuration. Wire to the left light goes through the metal brace, into the antenna mount and out to the LED unit.

REGGAB · « **Reply #16 on:** June 01, 2007, 08:35:13 PM »

The right side

REGGAB · « **Reply #17 on:** June 01, 2007, 08:36:57 PM »

This is one of the mufflers I bought from Terry (TCnBham)

REGGAB · « **Reply #18 on:** June 01, 2007, 08:38:47 PM »

Last one. This is the fuel outlet cover.

Author Topic: Hyper Lite Install and Other Additions to Henry's SEUC (Read 1820 times)

REGGAB

Re: Hyper Lite Install and Other Additions to Henry's SEUC

REGGAB

Re: Hyper Lite Install and Other Additions to Henry's SEUC

REGGAB

Re: Hyper Lite Install and Other Additions to Henry's SEUC

REGGAB

Re: Hyper Lite Install and Other Additions to Henry's SEUC