Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[DOOFUS]

This post was very helpful. I just ordered BLACK 10 inch OUTLAWZ -- good to know the existing lines will work.  Will post pix. DOOFUS

[LarryB]

HD2000, you got a pic of exactly how you rerouted the clutch line

[Roadhouse]

LarryB........sorry i do not, it was held down with a small metal clip on the cast steering head, and routed in front of the steering head. I just unscrewed the metal clip, took it loose from the reservoir, routed it behind the steering head, bolted it back to the reservoir and under that small metal clip, bled it a couple times at the clutch and it was all good. there was more slack in it than the brake line 

[red ben59]

 COOL, That a good look on that unit.

[gunlvr]

I am just curious if you had any problem running the wiring through the near 90 degree corners at the bottom of the handlebars?

[Roadhouse]

gunlvr...............we did until we figured out a trick. we took a nut, like a 3/8 and tied a piece of string to it, let it fall down thru the bend and then taped my wires to the string and slowly pulled the wires back thru....piece of cake once you get that nut thru. Before that we tried a coat hanger, stiff wire....everything just bent and wouldn't go around that 90  

[gunlvr]

Thanks for the tip. I was thinking of putting those bars on my dyna. I was at the dealers the other day and they had some neat looking bars (not the outlaw bars though) they just put on a street glide there. There was some funky bends at the top ot the bars and they said it took them 24 hours to put the damn things on and internally wire them. I am glad I am not paying that bill at 75 bucks an hour or whatever insane rate they charge. Enjoy the summer, nice bike you have there. Ride safe!

[Roadhouse]

  thanks for the compliment gunlvr....it took us about 4 hours and that was removing and reinstalling the front fairing which was probably the hardest, even though we are getting pretty good at it now, 4 times we have done it LOL. I agree with the insane rate some dealers charge, if you have a buddy you can definitely save some $$$$ doing it yourself.
The quality of the Wild 1 bars are exceptional............this is my second pair, I had a set on my 2000 FLHRCI also....enjoy your summer also and be safe!!

[jimb1957]

 Looking to but 12" wild 1 chubby outlawz apes on my2011 road glide custom, will i need to extend any of the cables or wires ?

[aclass]

Looking to but 12" wild 1 chubby outlawz apes on my2011 road glide custom, will i need to extend any of the cables or wires ?

Some say "no" but I say most definitely!  Your internal wiring should be long enough but IF you can get your hydraulic lines to work, they'll be stretched tighter than dick's hat band. Good luck.

[Roadhouse]

Some say "no" but I say most definitely!  Your internal wiring should be long enough but IF you can get your hydraulic lines to work, they'll be stretched tighter than dick's hat band. Good luck.

I also agree with aclass,,,,,,,,,,,I didn't have to as they were long enough BUT if I had to do it again I would put a longer hydraulic clutch line just to make it look better and follow the lines of the Outlawz. Also just my 2 cents.