Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: 110 HP  (Read 7669 times)

0 Members and 1 Guest are viewing this topic.

Heatwave

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1429
  • ‘10 CVO Ultra 120/127 & ‘17 CVO LTD 140/151

    • CVO1: 2017 CVO Limited (Garnet/Red) 128ci
    • CVO2: 2010 SE Ultra (Red/Slate)
Re: 110 HP
« Reply #15 on: October 19, 2011, 06:14:25 PM »

To tell you the truth I'm not sure what year of 110 this sheet is from, it was attached to my quote as to what I can expect and what JARZ have been obtaining, it is a kit they've worked on specific for the 110 CVO. Below are the pieces that make up the kit I'm looking at, just have to determine what exhaust to go with, Fullsac X pipe, 2-1 with a dummy pipe, I'm not sure, I'll have to decide.

Includes: chain drive cams,Feuling lifters,SE pushrods,Baisley pump spring and check valve,full port job with viton seals,compression adjusted and custom mapped on our dyno.We also have a JE 20degree reverse dome piston by Axtell sales that can be added to the kit.

 

They look about right for for that build on a newer 110" (2009+)
Logged

geezerglide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1868
  • New Geezerglide
    • AB

Re: 110 HP
« Reply #16 on: October 19, 2011, 07:29:15 PM »

Big Dog,

You have one of the finest shop in JARZ Performance, Darrell or Lee are  great builders and tuners. I ride all the way from Calgary to have them tune my bikes, they are profficient in tuning with SERT, TTS or Direct Link.

geezerglide
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 110 HP
« Reply #17 on: October 19, 2011, 08:34:42 PM »

I use Lonewolf Performance on Vancouver Island. He takes the time to step tune all the cells, both cylinders and get the VEs right on the money.
Logged

geezerglide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1868
  • New Geezerglide
    • AB

Re: 110 HP
« Reply #18 on: October 19, 2011, 10:37:34 PM »

I use Lonewolf Performance on Vancouver Island. He takes the time to step tune all the cells, both cylinders and get the VEs right on the money.

Dewey,

Wher on the island is Lonewolf, Victoria, Nanaimo or Campbelll River?

Thanks,

geezerglide
Logged

lonewolf55

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 75
Re: 110 HP
« Reply #19 on: October 19, 2011, 10:44:16 PM »

Dewey,

Wher on the island is Lonewolf, Victoria, Nanaimo or Campbelll River?

Thanks,

geezerglide
Nanaimo  :)
Logged

Big Dog

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 374

    • CVO1: 2009 FLTRSE3
Re: 110 HP
« Reply #20 on: October 20, 2011, 02:36:32 PM »

Big Dog,

You have one of the finest shop in JARZ Performance, Darrell or Lee are  great builders and tuners. I ride all the way from Calgary to have them tune my bikes, they are profficient in tuning with SERT, TTS or Direct Link.

geezerglide

That's good to know, I just moved here from Red Deer and found their shop touring around. Have heard good things about their tuning so I'm anxious to get my bike into them. If you're ever up this way and need anything, let me know.
Logged
Randy D
Kristie D, Angel on my shoulders, October 10, 1973-April 16, 2009

geezerglide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1868
  • New Geezerglide
    • AB

Re: 110 HP
« Reply #21 on: October 20, 2011, 09:18:45 PM »

Nanaimo  :)

I never knew

Thanks,

geezerglide
Logged

strokerjlk

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
Re: 110 HP
« Reply #22 on: October 22, 2011, 08:14:15 AM »

pretty common for a stage 1 110ci.
around 80/100 untuned is where they come in at.
95/115 tuned
with the 255 cams ,exhaust isn't as critical as other builds. so the peak numbers don't change much on a stage 1 110 with various pipes. the curve will move around some.

]
« Last Edit: November 24, 2011, 07:54:01 PM by naitram »
Logged


If you point your oxygen-acetylene cutting torch
at a temperature sensor and adjust it for the highest temp you have found stoichiometric
Ron Dickey

CVOThunder

  • Retired avionics squid 1984-2004
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 972
Re: 110 HP
« Reply #23 on: October 27, 2011, 09:49:35 AM »

I might have dreamed that I asked this before but if not, any recommended tuners north of Salt Lake City or close to it? Home is about 200 miles north of SLC. Thanks in advance.
Logged
2020 Road Glide Limited, 131" kit
2007 Softail Custom
2015 Road Glide Special, denim traded
2011.5 Big Blue Screamin’ Eagle Ultra Classic traded

roadking71865

  • "The Dark Knight"
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 406

    • CVO1: The Dark Knight
    • CVO2: '03 FLHRSEI2 (sold)
    • CVO3: '08 F-250 Diesel
Re: 110 HP
« Reply #24 on: October 27, 2011, 03:08:13 PM »

No cams here and the same setup except 1.75 baffles.  99.93 HP & 113.43 TQ
Logged
Fullsac B X-pipe
1.75 pwr. cores
Big Sucker A/C
TTS MasterTuner
BAL Tail Light, Motolights
Custom Dynamics LED Turning Lamps
HD LED Headlamp & Passing Lamps
J & M FlexPower AM/FM/WB Antenna
J & M FlexPower CB Antenna
Mini Beast Air Horn, Wheeldock EZ-UP Center Stnd
Kennedy Technology CellSet
External XM SRS Satellite Antenna
HarleyGoodies Floor board extenders
Progressive Monotubes
Progressive 440's
Clearview 9.5" windshield
Corbin Dual Tour Heated Seat

LC110

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 667
    • WI


    • CVO1: 2009 FLTRSE3 Stardust Silver / Titanium Dust 1of 1344
Re: 110 HP
« Reply #25 on: October 27, 2011, 04:43:06 PM »


No cams here and the same setup except 1.75 baffles.  99.93 HP & 113.43 TQ
Who tuned your bike?
Logged
Spending time learning the science of the mechanisms of friction, lubrication, and wear of interacting surfaces that are in relative motion
Razorback Performance Built & Tuned 113@ 122.59 HP/139.30 TQ

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: 110 HP
« Reply #26 on: October 28, 2011, 05:50:12 AM »

Big Dog,

You have one of the finest shop in JARZ Performance, Darrell or Lee are  great builders and tuners. I ride all the way from Calgary to have them tune my bikes, they are profficient in tuning with SERT, TTS or Direct Link.

geezerglide


JARZ was the first shop, we know of, to pull 130 hp from a 95" pump-gas street engine well over a decade ago.
Carbed, Wood 9B's. www.woodcarbs.com
Was about the same time we hit 100 hp from 80"ers with the Wood 8 cam. www.woodcarbs.com :)
Scott
Logged

Big Dog

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 374

    • CVO1: 2009 FLTRSE3
Re: 110 HP
« Reply #27 on: October 28, 2011, 01:05:29 PM »


JARZ was the first shop, we know of, to pull 130 hp from a 95" pump-gas street engine well over a decade ago.
Carbed, Wood 9B's. www.woodcarbs.com
Was about the same time we hit 100 hp from 80"ers with the Wood 8 cam. www.woodcarbs.com :)
Scott

That's sure good to hear, especially when they are just down the street from me. Those are some crazy horsepower numbers, wow!!! Can't wait for them to kick my 110 in the arse!!
Logged
Randy D
Kristie D, Angel on my shoulders, October 10, 1973-April 16, 2009

geezerglide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1868
  • New Geezerglide
    • AB

Re: 110 HP
« Reply #28 on: October 28, 2011, 02:04:28 PM »

That's sure good to hear, especially when they are just down the street from me. Those are some crazy horsepower numbers, wow!!! Can't wait for them to kick my 110 in the arse!!

Besides being HP Gurus, they are a great bunch of guys.


geezerglide
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: 110 HP
« Reply #29 on: October 29, 2011, 06:58:19 AM »

That's sure good to hear, especially when they are just down the street from me. Those are some crazy horsepower numbers, wow!!! Can't wait for them to kick my 110 in the arse!!

Quite sure they can take you where you want to go. :2vrolijk_21:
Scott
Logged
Pages: 1 [2]  All
 

Page created in 0.223 seconds with 21 queries.