Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[DCFIREMANN]

Uhhhhh... What was this thread about again?

\\


 

Be Safe

THE DAWG

[Stevema200]

Once again thanks to everyone for the feedback..!  Amazing how the content digressed from the origianl post..LOL

If anyone is still following this post I finally talked to SB Charlie.  Guides are cut to accommodate .600 lift heads have .050 off the face  and have 82cc chambers.  After talking to Charlie and my tuner the best case scenario is sticking with the Andrews 37 cams going to a gear drive set up.  I'll get some gains from doing that alone.  I also decided to upgrade my my tuner from Power Comander III to a set up that can tune each cylinder and new exhaust from a '03 style Pro Pipe to a new Drago 2 in 1.

This should put me in the 100/100 club and then some..

At this point to go bigger cams is not going to gain me a lot without going to higher flow injectors, bigger manifold and maybe upping the compression I dont want to lose my low end.

Thanks for all the responses..!

Steve