Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[kustomhd66]

Hi
Looking for TTS base map for this build. SE 22502-07 H/C forged std pistons, FullSac DX and 2.0" FullSac cores, cams .574 Feuling , AC is std. Bike is -12 CVO Ultra.
Thanks

[FLTRI]

Do you plan on street tuning this or take it to a Dyno tuner?
Best thing to do to get a calibration that the engine will run with is to try different calibrations starting with cals with mild cams...ie: SE204, SE251, SE255, SE259
Find which one provides the best idle and light throttle. Then tune from there.
Bob

[kustomhd66]

Do you plan on street tuning this or take it to a Dyno tuner?
Best thing to do to get a calibration that the engine will run with is to try different calibrations starting with cals with mild cams...ie: SE204, SE251, SE255, SE259
Find which one provides the best idle and light throttle. Then tune from there.
Bob

Thanks Bob
My plan is street tuning. Found this map EQC176-03, cams are SE-260.

[grandpa geez]

I too am looking for a base map I guess for my 09 FLTRSE. I have stock intake, just installed V&H True duals with High Output exhaust, and it has (Cycle Rama) CR575 cams. Any help would be appreciated! Thanks....Grandpa..........................ps I also will be street tuning!

[FLTRI]

Thanks Bob
My plan is street tuning. Found this map EQC176-03, cams are SE-260.

Howzit run with that calibration? Idle quality? Steady state cruise quality? WOT pull good through the rpms?
Bob

[kustomhd66]

Howzit run with that calibration? Idle quality? Steady state cruise quality? WOT pull good through the rpms?
Bob

Hi Bob
Thanks for asking.. But,
I must wait  couple of days. Bad weather here. Early in next week it will be better.