Topic: Throttle fail. Cruise fail .high idle (Read 1401 times)

KID ROCK · « **on:** March 21, 2015, 10:44:43 PM »

2009 fltrse3 intermittent problem. throttle failed well riding down road had to pull over and restart bike.
cruise button don't work right away got to hit it a couple of times.
bike idles high some times got to shut off and restart bike.
I changed the handle grips on it maybe I screwed up the fly by wire not sure.......any ideas boys could use the help.

OBB · « **Reply #1 on:** March 22, 2015, 07:01:58 AM »

Make sure your grip is pushed the whole way on. Seems like it isn't engaging the sensor. Quick thing to check first before you have to start digging deeper.

Major Tom · « **Reply #2 on:** March 22, 2015, 07:52:46 PM »

I had similar issues because my switch block was not pushed all the way in. A very small simple small adjustment and the throttle now engages properly. No more problems.
Cheers Tom

smkymtnboy · « **Reply #3 on:** March 22, 2015, 08:40:06 PM »

there is thread somewhere with instructions how to let the ecm re-learn idle. involves turning switch on-off so many times etc. etc. anyways will try to find the thread and re-post

ozrider · « **Reply #4 on:** March 23, 2015, 12:58:38 AM »

Quote from: smkymtnboy on March 22, 2015, 08:40:06 PM

there is thread somewhere with instructions how to let the ecm re-learn idle. involves turning switch on-off so many times etc. etc. anyways will try to find the thread and re-post

Cycle the ignition switch 4 times.

That is turn it on until everything activates, then off, 4 times

RayG · « **Reply #5 on:** March 23, 2015, 09:43:21 AM »

Similar thing happened to me I had to clear a few codes and address the problem when it continue to reappear. In my case I had to replace the throttle assembly. The 08 was the first year with the TBW so I have had other issues to keep an eye on. Resetting as ozrider mentioned will get you going but I would still check for codes. If did not learn the procedure for resetting the ignition and checking codes I would have been towed multiple times every summer.
God Luck

Fullsac Performance · « **Reply #6 on:** March 24, 2015, 11:10:20 AM »

Quote from: Major Tom on March 22, 2015, 07:52:46 PM

I had similar issues because my switch block was not pushed all the way in. A very small simple small adjustment and the throttle now engages properly. No more problems.
Cheers Tom

Seen that one before! Good call.

SG

Author Topic: Throttle fail. Cruise fail .high idle (Read 1401 times)

KID ROCK

Throttle fail. Cruise fail .high idle

OBB

Re: Throttle fail. Cruise fail .high idle

Major Tom

Re: Throttle fail. Cruise fail .high idle

smkymtnboy

Re: Throttle fail. Cruise fail .high idle

ozrider

Re: Throttle fail. Cruise fail .high idle

RayG

Re: Throttle fail. Cruise fail .high idle

Fullsac Performance

Re: Throttle fail. Cruise fail .high idle