Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Nicky Pass]

After looking for some license plate frame options, I settled on the HD billet plate frame.  I could have gone Kuryakin or Yaffee, but I think the look this one.  It gave me a reason to take it for a ride an take some good pic with my DSLR....

[Alan Perlin]

Looks great.

[D-N-D]

Very Nice !!!

[mkevns]

Beautiful! That's what they look like when they finally come in without any problems.... Ordered hard candy Dec. 5th....... STILL WAITING.....

[Harley Guy]

Very nice.
.
Ride on....

[ONE2BAJA]

Nice!

[15CVOSG]

very nice,...

 l decided to go with the yaffe plate and had it painted to match my carbon crystal... love the clean look ...

[plustiano]

Nice! Is that Power duals on there?

[Nicky Pass]

Nice! Is that Power duals on there?

Yes sir.  They sound awesome with the 4" Rineharts...although I may try the OS 450s from Vance and Hines...

[East Coast]

Does that mean you really aren't diggin the Rineharts? lol

[Nicky Pass]

Does that mean you really aren't diggin the Rineharts? lol

To me Reinharts are the classic Harley sound.   I have had them on true duals and I think that sounds even better with say X pipe.

 I posted a video in the intake and ECM section check it out!

[Wild Hog 4]

Yes sir.  They sound awesome with the 4" Rineharts...although I may try the OS 450s from Vance and Hines...

Nice looking bike!

Regarding your power duals I have the same headers on mine, however I noticed my right floorboa d vibrates more than it should, and thought the mounting arm must be touching the exhaust ,so I decided to take a look,and on removal the rear floorboard arm was touching the heat shield and also the exhaust itself and has ground a groove into it!
Can you tell me does yours have plenty of clearance?
I loosened the heat shield but there is not enough adjustment to stop it touching ,so my only option was to shim the mounting arm out with a couple of washers.
Any one else have this problem?

[Nicky Pass]

Nice looking bike!

Regarding your power duals I have the same headers on mine, however I noticed my right floorboa d vibrates more than it should, and thought the mounting arm must be touching the exhaust ,so I decided to take a look,and on removal the rear floorboard arm was touching the heat shield and also the exhaust itself and has ground a groove into it!
Can you tell me does yours have plenty of clearance?
I loosened the heat shield but there is not enough adjustment to stop it touching ,so my only option was to shim the mounting arm out with a couple of washers.
Any one else have this problem?

The kit comes with floor board spacers, make sure they are on! 

[Wild Hog 4]

The kit comes with floor board spacers, make sure they are on!

Hmmm , never seen these spacers ,they must have been left on my previous road king by dealer.
Are these spacers for front and back bracket and how thick are they,?
A picky would be very much appreciated buddy

[Nicky Pass]

Hmmm , never seen these spacers ,they must have been left on my previous road king by dealer.
Are these spacers for front and back bracket and how thick are they,?
A picky would be very much appreciated buddy

That is a good possibility!  They are 1"...here is the install instructions, you can see here.
http://vanceandhines.com/download/D790IN.pdf