Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dano]

I'm looking for part #'s for the Quicker adjustable pushrod kit and performance tappets. I found #106-6051 for the pushrods and #330-0174 for the lifters.  Anyone know if they are the correct ones for an 09 CVO ROAD GLIDE?  Thanks in advance for any help

[Para Bellum]

If you want the lifters with the travel limiters, 330-0174 is correct.  If you don't want the TL, then 330-0175 is the one.

You have the correct number for the Quickee pushrod kit with covers, keepers, gaskets and o-rings.

[dano]

I've been reading on some of the sites for fitment they don't fit. Thank for clearing it up for me.  Any ideas as far as where you guys are buying from? 

[HD Street Performance]

I would not use the Quick S&S pushrods
Consider their tapers or better yet .145 wall Smiths. They are harder to install and worth the trouble. A largely exposed small adjuster is a flex point and will contribute to valve train noise.

[dano]

With. Smith rods what would you suggest for lifters?

[HD Street Performance]

S&S or other premium Delphi lifters.
Not stock Harley lifters

[dano]

Any suggestions as where to order from?

[jwalker793]

Dennis Kirk

[HILLSIDECYCLE.COM]

Nothing wrong with S&S Quick pushrods.
Scott

[prodrag1320]

never had any probs with the quickies either.the S&S standard lifters are the ones for most builds.dont get the limiters unless your going with a very aggressive cam profile and going to be reving the piss out of it

[dano]

Thanks for all the input.  I don't rev the piss out of my bike, just looking for something reliable

[HILLSIDECYCLE.COM]

We have used S&S valvetrain components here almost exclusively, for about 20-25 years.
They work well.
Scott