Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[CVOjunkie]

With the baker DD6 or the SE harley gear set are you able to use the stock hyd clutch cover or did you have to buy another? I know what the MOCO says but what is the differences on the covers ?Also which tranny is beter and why? I pull a trailer so I need low end torque . But I also  like to go like hell and usually try about 10 or so over the speed limit on average.Thanks

[hogasm]

I have the Baker DD6 in my 04. ;I did change the ratios in 1-3 gears for more towing power like you are looking for.

With the Baker I had to change the cover, but can go back to stock if need to. You will change the comp sprocket to a 28 tooth. One problem here is that I have not been able to find a 27 tooth.

With Harley you have to do a little grinding on the case and you can not go back to the 5 speed. The one thing I like about the Harley is the ability to change the comp sprocket down a tooth [24] and still have a overdrive when in 6th gear.

I do the same as you, tow a trailer. I am in the process of taking the Baker out of my bike and installing it in my wifes Street Glide and installing Harley's 6 speed back in mine. I don't plan on getting rid of my bike anytime soon.

[jfscheck]

I have the Baker DD6 as well...

They used my stock Hydro clutch cover.

The install looks great (polished) and the DD6 is just kick butt!  Changes the WHOLE bike!!!

[don]

I dreamed and lost a little sleep on the 6 speed for my bike. Finally went with a complete se 6 speed. For me it seem to be the best way to go.  Very satistied. don

[jfscheck]

That extra 6th gear with the 103 (for those of us that like to "cruise" around 75-80+) just makes a 6th speed a must - my favorite - the Baker DD6!!!

 [smiley=drink.gif]