Hello, I am a long time reader and appreciate all of the advise on this thread. I have been using TTS on my 2013 CVO Road King since May 2014. I have the Fullsac headpipe, 2.0 Power Cores, Andrews 54 Cam, .030 cometic head gasket and some minor porting on the heads. Additionally, the heads were shaved .030. It has been nearly a year since I have worked with tuning on the bike and thought I had it dialed in fairly well. I finally found the time to try to get the most out of the TTS with the recent upgrades to the software. I noticed in the 2014-2015 Calibrations # EWI617-05 is the exact same build as my bike minus the minor headwork. Is it possible to use this calibration as a starting point? If not, can it be modified to work? I know that many hours of dyno-tuning is conducted to perfect these calibrations. I can't find anything this close in the 2013 calibrations. I tried calibration # EAD009-01 and I am not pleased with it. Any advice that anyone may have will be greatly appreciated.
Author
Topic: TTS Mastertune Calibration Files (Read 1632 times)