So having decided to go Fullsac on my new CVO Road Glide my wife suggested riding to Az and get it done. I already had running dialog going with Fullsac so I asked about recommended tuners in the area. "We do it all right here" was the answer I got from Steve along with a detailed breakdown of the parts/service to be performed. I made an appointment thinking going to the source is a good plan. Besides, who doesn't enjoy a good ride.
Upon arrival we discussed my goals and riding habits taking into account that my wife liked the "quiet" over the VH Pro Pipe we had run on 05 Ultra. I went with his suggestion of the 1.750 baffle with the rear section drilled to even tone it down bit more at cruise and eliminate a possible droan noise in her FF helmet. Steve then surprised me with the latest DX Head Pipe with 4 O2 ports that allow both up stream and downstream sampling. This allows the computer to combine the sampling data and create a good foundation for him to massage. He also dials in your speedo and adjust's the cooling fans to come on sooner. Work was completed in about 5 hours and yes you can hang out, ask questions or just observe, Steve and his crew are very accommodating and pleasant.
Baseline #'s 81 Power/94 Torque the finished product .......98/109 at 2400 rpm and pulls strong down range. It's a lot of bang for your buck IMHO.
I thought my bike ran well before but now.......The ride home "WOW" effortlessly cruise at 80 tip in to pass and it hits 3 digit's. No blistering heat on the right side either. Mileage was 38 with cc set at 80. Fullsac is a good reason to come to Az this winter.
Thanks to admin the dyno sheet is below!
Author
Topic: Just go Fullsac (Read 4903 times)