www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Putting Fog Lights on 2015 RGU  (Read 7035 times)

0 Members and 1 Guest are viewing this topic.

Designflaw

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 328
  • www.CVOHARLEY.com
    • KY

    • CVO1: 2017 CVO Street Glide
Re: Putting Fog Lights on 2015 RGU
« Reply #15 on: July 18, 2017, 05:07:45 PM »
Quote from: Borntoride on July 17, 2017, 08:44:24 PM
Hey guys, I just purchased the aux switch kit #71400105. Can anyone tell me what will happen if I plug in the 6 pin connector that is under (connected to the existing blank switch block) and connect it to the new aux switch block without using the supplied harness? I am assuming that the harness is for installing additional accessories. 

I have a 2015 FLTRUSE

the 2015 is a can-bus system. those wires are set to send a signal to the passing lamps when connected at the turn signal. Its a 2 wire system and it knows when the extra draw is needed. I do not know if you can interrupt that power to go some place else, that for smarter people than me.
Logged
2017 FLHXSE CVO Sunburst Orange/Starfire Black
Performance: HP 99 TQ 121
Stage II = HD Torque Cam SE8-447
Rinehart Slimline, 4" Cans
HD Tuner w/ Wideband module
Screaming Eagle Front Fork internals, Tuned Rear
 
Appearance:
Blacking out all chrome and bolts. (Work in progress)
Custom color matched carbon fiber parts
HD Passing Lamps and LED lamps

Maczter

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 81
    • OH

Re: Putting Fog Lights on 2015 RGU
« Reply #16 on: July 28, 2017, 10:06:52 PM »
A poster wanted to know if the mounts fitted a 2016.  Here they are mounted on my 16.
Logged
2016 CVO RGU, Stardust Silver/Palladium Silver, VH Pipes and American Custom headers, VH Tuner, Klock Werks windshield, Harley Boom II Sound System

Maczter

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 81
    • OH

Re: Putting Fog Lights on 2015 RGU
« Reply #17 on: July 28, 2017, 10:07:26 PM »
One more.
Logged
2016 CVO RGU, Stardust Silver/Palladium Silver, VH Pipes and American Custom headers, VH Tuner, Klock Werks windshield, Harley Boom II Sound System

Maczter

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 81
    • OH

Re: Putting Fog Lights on 2015 RGU
« Reply #18 on: July 28, 2017, 11:34:07 PM »
Quote from: Borntoride on July 17, 2017, 08:44:24 PM
Hey guys, I just purchased the aux switch kit #71400105. Can anyone tell me what will happen if I plug in the 6 pin connector that is under (connected to the existing blank switch block) and connect it to the new aux switch block without using the supplied harness? I am assuming that the harness is for installing additional accessories. 

I have a 2015 FLTRUSE

The other switches, and the harness that plugs in under the left cover, are only used for additional items, like the colored LED aux lighting or heated accessories.  The fog lights, when bought per the instructions, work as advertised...but I did have to buy the fog light switch ($14 at the dealer) that was not on the 71400105 harness.
Logged
2016 CVO RGU, Stardust Silver/Palladium Silver, VH Pipes and American Custom headers, VH Tuner, Klock Werks windshield, Harley Boom II Sound System

harleygtp

  • Newbie
  • *
  • Offline Offline
  • Posts: 36
  • www.CVOHARLEY.com
    • NY

Re: Putting Fog Lights on 2015 RGU
« Reply #19 on: July 03, 2020, 04:49:35 PM »
Bumping this to the top.  I'm looking to install fog lights 68000090 on my 2015 FLTRUSE

So many options for these aux switches!

If I'm reading this correctly... all I need is the fogs, mounting bracket 68000183 , and switch module 69200172?  That module replaces the left side module with the dummy switches?   Where do the fogs get wired to and will I need to flash the bcm?
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Putting Fog Lights on 2015 RGU
« Reply #20 on: July 05, 2020, 08:07:12 PM »
In the switch kit, the harness they give you plugs in under the side cover from there you wire the lights to the switch. 
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017
Pages: 1 [2]  All
« previous next »
 

Page created in 0.235 seconds with 25 queries.