Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[WTF Chuck]

I do not use the yellow wire you must test this yellow is to hear music  on 20s
use at your risk

[grv]

use at your risk

thanks, Chuck.
I understood for a long time that on my fear and risk... 
it is necessary to try your diagram of connection... I have old bluetooth Sena with an output 1/8 and USB.... it works at my place as the hub - tells music from the device without Bluetooth to Bluetooth - a sound. I want to use for an experiment instead of BT10.
PS.
I correctly understood that the built-in BT10 microphone needs to be switched-off in the BT10 casing, having torn from it wires?

[WTF Chuck]

You should only have to disconnect mike in BT10 if using 2 wire 1/8plug
If you are using 3 wire the 1/8 plug  should disable internal mike.
 

[grv]

thanks a lot for patience, Chuck.
I will try

[grv]

I have made an experiment: I used two pieces of Scala G9. At one G9(1) has switched-off the microphone and in 3,5 I have connected 3,5 as has offered Chuck. I have connected him in 280, I have coupled to the second G9(2). The sound, teams and GPS from the motorcycle, as well as assumed Chuck, is heard in (2). At the same time sound only Mono  . Motorcycle (BoomBox!), unfortunately, doesn't understand my voice commands via the microphone (2) and doesn't hear. I will be grateful to you, Chuck, for your comments and opinion.