Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GMR-PERFORMANCE]

Its not a CVO       but the numbers on this little 107 are just so nice, I thought I would share it  Build is our 107 cnc heads 1.9/1.610 600 cam HPI 58 and  a rush Wrath pipe Comp ratio is 10.9 Bike is a RK and the guy is 99% solo rider so tq was not the main goal .  Overall the tq curve is very decent and flat pulls out well .. BTW that is a 5th gear pull SE tuner shutting me down 5400 in 6th .. 6th gear tq was 126 almost 127   if I had to guess on HP I think that it would gain 1-3 call it 2 . 

[Yellow09SERG]

Nice build Steve. Whats your thoughts on the Rush Wrath? Is it as ungodly loud as the D&D?

[GMR-PERFORMANCE]

Yes it is a loud pipe like the zilla.. Different though as the zilla is a perf baffle where as the rush has a louvered. But understand some really like that sound and its still VERY popular today.   Myself I like quite and that is why I run the crusher mellow mufflers If I could reduced sound further with zero loss of power I would ..  " walk softly carry a big sitck "   I do shock many other riders when they think my bike is nothing as its not loud.. Always proud of the wife as she is soooo courteous  to give a wave on the way by     

[Yellow09SERG]

Yes it is a loud pipe like the zilla.. Different though as the zilla is a perf baffle where as the rush has a louvered. But understand some really like that sound and its still VERY popular today.   Myself I like quite and that is why I run the crusher mellow mufflers If I could reduced sound further with zero loss of power I would ..  " walk softly carry a big sitck "   I do shock many other riders when they think my bike is nothing as its not loud.. Always proud of the wife as she is soooo courteous  to give a wave on the way by   

Thank you Steve. Sure sounds like the Crushers are going to be the way I end up going

[Yellow09SERG]

Steve how much difference do you see a difference in performance between the Crusher Mellows and the regular Crusher?

[GMR-PERFORMANCE]

None

[hrdtail78]

Nice job on the build.

[Twolanerider]

That looks a lot like the 107" build's final outcome when I did my 05 using Mackie's 598 cam and some good headwork and a 50mm TB.  Nice looking build  .

[Scott7d]

There isn't even a TQ curve hardly to speak of, the thing just wants to take off. That has GOT to be a fun bike! 

[JoeVibe]

Nice build Steve! Somebody's gonna have a fun ride. 

Since you're making this kind of power with a 107, I may need to raise my expectations!

[JoeVibe]

Nice build Steve! Somebody's gonna have a fun ride. 

Since you're making this kind of power with a 107, I may need to raise my expectations!

Never mind......