Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SSTuner]

Got bored this afternoon.  Took a spare set of Breakout mufflers and de-catted them.  The exhaust on my 2016 CVO Pro Street is too quiet and I don't see anything available in the market at this time. 

This first picture is the baffle removed after drilling out the three stainless rivets. 

Yes, I do have a TTS to use to tune as required.

[SSTuner]

This picture shows the "cat" end.

[SSTuner]

This picture shows the "exhaust" end.  Looking down you will see a block off plate.

[SSTuner]

The tool required.

[SSTuner]

After a few minutes here one photo of the material that I removed.

[SSTuner]

Another view of material.

[SSTuner]

Here is the block of plate removed.

[SSTuner]

Looking down the cat end.  I will chisel the remaining material in the morning.

[SSTuner]

Here looking down the tailpipe end.

[SSTuner]

Not sure how it's going to sound when it's installed.  But what the hell, less than an hour of my time and spare mufflers laying around I don't think I wasted my time.  I'll post a sound clip when it's all back together.

[gmeikle]

Interesting mate , thanks from Perth Western Australia.

I'll follow this thread and may do the same to a set of non CVO Breakout mufflers as they're easy to get here

[SSTuner]

Your welcome.  Not hard to do as you can see, if you have any questions just ask me.