Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[pudgeyxj]

Just booked mine into our local engine builder for lifters, cams, etc... Sept 12th can't come fast enough

Cheers 

P

[r0de_runr]

I already have SE adjustable PushRods, so a couple of common hand tools.  Less than $100 in parts.
Every rear tire change I also do my lifters.  Overkill, maybe.  Easy to do, cheap insurance.

[HD Street Performance]

Just a FYI and for the benefit of others reading there is a slow bleed version of the same lifter with axle oiling. These are stock replacements.

[Twolanerider]

Just a FYI and for the benefit of others reading there is a slow bleed version of the same lifter with axle oiling. These are stock replacements.

Post Office delivering a set here from Amazon sometime today.

https://www.amazon.com/gp/product/B01DFADTS6/ref=ox_sc_sfl_title_11?ie=UTF8&psc=1&smid=A1AOMQWLSRNOND

[CHH_Badkarma]

Just a FYI and for the benefit of others reading there is a slow bleed version of the same lifter with axle oiling. These are stock replacements.

Does that mean no better than stock lifters?

[Twolanerider]

Does that mean no better than stock lifters?

No, that just means they fit in the stock hole without any alterations elsewhere.  It is a better part though.

[CHH_Badkarma]

good to know. been undecided between these and S&S lifters

[HD Street Performance]

Does that mean no better than stock lifters?

I think the QA is better and so is the materials but why not go for the others? The cost is minimally higher.

[CHH_Badkarma]

I think the QA is better and so is the materials but why not go for the others? The cost is minimally higher.

Oh I dont mind cost. Just wondering if there was anything that was better than the ol standby S&S.

[MLCRISIS]

Is a big bore 45 degree air cooled v twin on a single crank pin junk? Yep, but don't they sound cool?

[CHH_Badkarma]

Nothin sounds better than sayin you have . 110 cubic inch grenade between your legs lmao

[J.D.]

Remember the current S&S "standard" lifters are the previous HD "B" lifters (made by Delphi).

[Limeytrichevy]

What about the 117ci kits for the 110. Is it just transferring the problems over to a new build or are the parts used inherently better than stock?

[Unbalanced]

Is a big bore 45 degree air cooled v twin on a single crank pin junk? Yep, but don't they sound cool?

Why I went to a 5 piece from P3R - Rebuildable and balanced to 60%. 

By sounding cool do you mean the exploding lifters 

[TheGullGuy]

Confused . . . I have 30K at the moment, dealer changed my fluids every 2,500 miles, I have a few years left on the extended warranty. . . no problems other than a pinhole in the head that needed replacing . . . do I leave things alone and hope? . . . bike runs great . . . am I looking at an unavoidable problem in my future if I don't replace something?  Just came off a 6,500 mile run . . . don't want to be found on road dead . . . not a gearhead, know absolutely nothing about what keeps my CVO running other than my key and the fuel I put in it . . . this thread has scared the S...t out of me . . .