I believe I have the Twin Cam removal tool. After some reading it looks like I can purchase the M8 install plate from George's Tool to use with my Twin Cam install tool.
As of now I'm thinking of using one of the TTS cams. They look like they are very well thought out as to where they perform in the rpm range. It will depend on if I change anything more than just the Cam. I have to do some more research to see if changing the throttle body and injectors is beneficial. No bore change, no head work, no compression change....
I am considering doing the same, once the S&S oil pump and cam plate arrive. I am going to be "in there" why not put a cam in it too.
That said, looking thru my TTS cal list, there is no starter maps for a stock bore 117" with either the tts100 or tts150 cams.
I did email TTS with inquires about recommendations yesterday, but due to the weekend and their recent move, I am not expecting a super quick response.
I will be swing by HPI sometime this week to drop off a spare TB I have and let Jimmy do his magic, and ask his opinion on injectors.