Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[electraglideclyde]

When I removed the stock dual beam headlight to replace it with a LED, I also removed the wiring harness that splits the headlight connector to connect to the dual beam.  Now I can't find the splitter.  I've been to several HD shops and no one has a clue.  Anybody have a parts supplement for a 06 CUSE that can give me a part number for that wiring harness ?

[hd-dude]

I have the book at the shop, I'll check tomorrow for you if nobody has it sooner.

[Fired00d]

Have you tried looking for it on Ronnies OEM Parts Finder? Not sure what part you're speaking of or I would try to find it for you.

 
Ride Safe,
Fired00d
 

[Wrongway]

 The way I read this is that you need the xtra harness they have for controlling the garage door opener. If not someone will find what you need.
Part number is 70174-06 for the complete harness.

[electraglideclyde]

The way I read this is that you need the xtra harness they have for controlling the garage door opener. If not someone will find what you need.
Part number is 70174-06 for the complete harness.

 I believe #3 is the correct part.  WOW, $121.99 for a couple of connectors and some wire.  I guess I'll have to try and make one.
Thanks

[grc]

There is another part number listed but not illustrated that may be just the smaller Y-harness to accommodate the dual bulbs.  See if your dealer can look this one up and see if it's what you need.  It's about $34, versus approximately $143 for the harness with the garage door opener connections.

70319-04  WIRING HARNESS HALOGEN BULB INTERCONNECT

Jerry

[electraglideclyde]

Thanks Jerry.  I will try that one.

[Aussie]

Has there been changes accessing Ronnies OEM Parts Finder?
I have been using it for some time and now the link takes me to a Dead End Page after I select the link to go to HD parts finder.


 

[Twolanerider]

Go to a good local auto parts store.  Replacement pigtails for various different headlights will be a stocked item.  If they don't have a Y connector they'll have enough pieces you can make one.

[grc]

Has there been changes accessing Ronnies OEM Parts Finder?
I have been using it for some time and now the link takes me to a Dead End Page after I select the link to go to HD parts finder.

This is the address I have set up in my shortcut for Ronnies, still works as of this am.  I have noticed in recent weeks the site is often slow to navigate.

http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

Jerry

[Aussie]

This is the address I have set up in my shortcut for Ronnies, still works as of this am.  I have noticed in recent weeks the site is often slow to navigate.

http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

Jerry

This one works okay, thanks Jerry.