Topic: Will my 110 cylinders fit a 103 as a straight swap? (Read 2956 times)

RoadDawg · « **on:** October 06, 2018, 06:42:39 AM »

Have someone who wants to buy my 2014 110 cylinders, pistons, throttle body, cams, etc. for his 2016 103 cu Street Glide. Will this fit as a straight swap? If not, what engines will it fit? I have the top end from my CVO Breakout on eBay.
Thanks for your replies.

MCE · « **Reply #1 on:** October 06, 2018, 08:20:40 AM »

I'm pretty sure you'd need to bore the engine case to get them on there.

johnsachs · « **Reply #2 on:** October 06, 2018, 08:35:29 PM »

Quote from: MCE Performance on October 06, 2018, 08:20:40 AM

I'm pretty sure you'd need to bore the engine case to get them on there.

Bore the case for CVO 110" cylinders.

MCE · « **Reply #3 on:** October 06, 2018, 09:54:42 PM »

The other alternative is to get 110 drop on cylinders from SE or S&S (which are super thin).
Boring the case is the proper way to go about it.

Scott7d · « **Reply #4 on:** October 09, 2018, 07:21:49 PM »

Also, would the TB from a CVO be an actual upgrade? I was under the impression they are both 50mm.

hd-dude · « **Reply #5 on:** October 09, 2018, 07:24:32 PM »

TB is the same

Author Topic: Will my 110 cylinders fit a 103 as a straight swap? (Read 2956 times)

RoadDawg

Will my 110 cylinders fit a 103 as a straight swap?

MCE

Re: Will my 110 cylinders fit a 103 as a straight swap?

johnsachs

Re: Will my 110 cylinders fit a 103 as a straight swap?

MCE

Re: Will my 110 cylinders fit a 103 as a straight swap?

Scott7d

Re: Will my 110 cylinders fit a 103 as a straight swap?

hd-dude

Re: Will my 110 cylinders fit a 103 as a straight swap?