Topic: start without fob HELP!! (Read 12707 times)

bradthomas1965 · « **Reply #45 on:** January 01, 2019, 10:42:02 PM »

Stil no luck.
Haven't been back to dealership yet.

hd-dude · « **Reply #46 on:** January 08, 2019, 06:01:12 PM »

I had a similar bike towed into the shop recently, the customer had lost the keys and fob. I ordered new keys and a replacement fob. In order to program the fob the security system must be disarmed. I was able to retrieve the PIN using my software but when I tried to get the system to allow me to enter the PIN it did exactly as you have described. I tried everything to get to the PIN menu with no luck. I had a hunch that it may be something to do with the tach / speedo combo so I swapped it for a stock road king speedo. The PIN menu came right up on the first try. I then successfully did the required programming for the new fob.

So, there must be something in some of the combo speedo/tach units that do not allow the PIN entry. Perhaps there is a software issue in the speedo/tach that prevents it or there is a different method to get into the menu? The dealer should be able to shed some light on this issue for you......

bradthomas1965 · « **Reply #47 on:** January 08, 2019, 08:42:57 PM »

Thanks so much.

bradthomas1965 · « **Reply #48 on:** February 03, 2019, 04:43:24 PM »

FINALLY, figured it out.
After turning ign on, press both turn signals fast & realease, dont press & hold like manual says, holding turn signals in makes alarm go off.
I turned ign & lightning fast pushed both turn signals & released fast, ability to enter code popped up. I entered code & it worked!

14 CVO King · « **Reply #49 on:** February 03, 2019, 05:26:52 PM »

Quote from: bradthomas1965 on February 03, 2019, 04:43:24 PM

FINALLY, figured it out.
After turning ign on, press both turn signals fast & realease, dont press & hold like manual says, holding turn signals in makes alarm go off.
I turned ign & lightning fast pushed both turn signals & released fast, ability to enter code popped up. I entered code & it worked!

Awesome, took a while but good to see everything worked out.

bigC · « **Reply #50 on:** February 03, 2019, 05:40:50 PM »

Glad you finally got it figured out!

skratch · « **Reply #51 on:** February 03, 2019, 05:55:59 PM »

and it only took 4 months

glad you got that taken care of. now, i bet you'll never forget how to do it.

bradthomas1965 · « **Reply #52 on:** February 03, 2019, 10:52:49 PM »

Yes, thanks!

Author Topic: start without fob HELP!! (Read 12707 times)

bradthomas1965

Re: start without fob HELP!!

hd-dude

Re: start without fob HELP!!

bradthomas1965

Re: start without fob HELP!!

bradthomas1965

Re: start without fob HELP!!

14 CVO King

Re: start without fob HELP!!

bigC

Re: start without fob HELP!!

skratch

Re: start without fob HELP!!

bradthomas1965

Re: start without fob HELP!!