Sorry guys, but the pics of my bike will have to wait. The bike is back at the dealer for the following:
1) Fairing Oil Temp gauge doesn't read any temp. Gauge also has annoying red glow at night along left edge of gauge face. Seems as if the gauge face not properly seated. Before the install, I suggested that the sending unit be installed in the oil pan (per your previous threads), but the dealer apparently installed it upstream of the oil cooler.
2) Excessive exhaust popping during decelleration.
3) Yellow discoloration on brand new right-side V&H Oval Slip-On. Apparent when they rolled the bike out of the shop. Must have yellowed during the dyno run.
Bike seems to be running hotter (and leaner) after installing Stage 1 AC, V&H Slip-Ons, and PCIII. Could be my imagination. Would help to have a working oil temp gauge. I don't like the dipstick design since I had one stolen off my previous bike.
Anyway, I meet with the GM, Service Mgr, and Tech tommorrow to discuss the issues. I'll keep you posted with the outcome.
Rick