www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 103 rocker plate question  (Read 1257 times)

0 Members and 1 Guest are viewing this topic.

bubtrauma

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 951
103 rocker plate question
« on: August 28, 2019, 10:04:26 AM »
Hi Guyz

If I remove my rocker assembly what do I need to do to reinstall. Are there centering bolts and where can I get some.
Logged
bend it, chop it, cut it, bang it, weld it and paint it to match........

chaos901

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 480
  • FLHRSEI.ORG

    • CVO1: 2000 SE Road Glide
    • CVO2: 2008 SEUC3
    • CVO3: 2010 SEUC5
Re: 103 rocker plate question
« Reply #1 on: August 28, 2019, 11:04:45 AM »
If you get "rocker lockers" or "rock-outs" this will take care of the positioning. 
Logged

bubtrauma

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 951
Re: 103 rocker plate question
« Reply #2 on: August 28, 2019, 11:09:46 AM »
Rocker lockers lock the shaft which I have I am talking about the centering of the whole plate to the rocker box base.
Logged
bend it, chop it, cut it, bang it, weld it and paint it to match........

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 103 rocker plate question
« Reply #3 on: August 28, 2019, 11:51:36 AM »
Pull it toward the intake and lock it down, then torque the bolts including the breather that bolts.
Logged

bubtrauma

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 951
Re: 103 rocker plate question
« Reply #4 on: August 28, 2019, 11:57:36 AM »
I am trying to get rid of  some noise and I want to remove my adjustable pushrods because they are hitting my tubes and put stock ones in. I still have stock cams and while I m doing that I want to check rocker side clearance. I also have rocker lockers. I got a tick that I have to find.
Logged
bend it, chop it, cut it, bang it, weld it and paint it to match........

TN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2973
    • SC


    • CVO1: FLTRSE3
Re: 103 rocker plate question
« Reply #5 on: August 28, 2019, 01:16:04 PM »
Using the rocker lockers the support plate is not really adjustable any longer, it takes the play out from being sleeved. SE tapered adjustable pushrods may help if the pushrods are hitting, any witness marks on your tubes?
Logged
Wut the hell was that maneuver

bubtrauma

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 951
Re: 103 rocker plate question
« Reply #6 on: August 28, 2019, 01:18:46 PM »
Yes there are witness marks on the tubes and I want to check the end play on the rockers and make sure it is not more than .003 when cold.
Logged
bend it, chop it, cut it, bang it, weld it and paint it to match........

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 103 rocker plate question
« Reply #7 on: August 28, 2019, 01:56:51 PM »
The rocker clearance new is in the .010" area. You are looking for ghosts there to get rid of noise. The top tubes need to be opened up to 5/8" 1" down from the top, use the adjustables (another waste of time and money chasing noise to think properly sized solids are better). Use rocker lockers and you are done on top. The heads are stock? If not what is the spring pressure? Lifters?
Logged

bubtrauma

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 951
Re: 103 rocker plate question
« Reply #8 on: August 28, 2019, 01:59:17 PM »
 Lifters are new (fueling lifters). I got tubes with the pushrods. S&S quickies
« Last Edit: August 28, 2019, 02:21:38 PM by bubtrauma »
Logged
bend it, chop it, cut it, bang it, weld it and paint it to match........

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 103 rocker plate question
« Reply #9 on: August 28, 2019, 03:48:05 PM »
Ok use those and the other suggestions I posted and if it is still clattering,  the cam profile and/or springs are likely the culprit.
Logged

bubtrauma

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 951
Re: 103 rocker plate question
« Reply #10 on: August 28, 2019, 05:55:32 PM »
All stock other than air breather and slip-ons.

Thanx
Logged
bend it, chop it, cut it, bang it, weld it and paint it to match........

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 103 rocker plate question
« Reply #11 on: August 28, 2019, 08:47:47 PM »
Good deal. You now know what to do to fix the issue and what will be the "feel good" items that won't hurt anything but won't address the issue either.
Logged

VANAMAL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1862

    • CVO1: 2012 SESG
    • CVO2: 2005 seeg banana
Re: 103 rocker plate question
« Reply #12 on: August 29, 2019, 12:11:27 AM »
You should shim the rocker shaft on the non thrust side. Shim kits are avail
Logged

bubtrauma

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 951
Re: 103 rocker plate question
« Reply #13 on: August 29, 2019, 07:04:41 AM »
Which is the non thrust side?
Logged
bend it, chop it, cut it, bang it, weld it and paint it to match........

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 103 rocker plate question
« Reply #14 on: August 29, 2019, 12:18:17 PM »
Look at the witness marks and the angle of the pushrod, different for intake vs exhaust.
Logged
 

Page created in 0.243 seconds with 20 queries.