www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: SUBURBAN M8 124 or 130 CI PISTONS  (Read 6900 times)

0 Members and 2 Guests are viewing this topic.

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #15 on: January 01, 2020, 09:27:02 AM »
I have been using unfinished S&S cylinders and the Mahle pistons very successfully. I season them, bore and hone in plates on a Sunnen CV616. Last set was skirt coated by line2line and made 160hp @ 126" 4 3/8" stroke. Owner reports it is very quiet.
Have another set in work 130" same deal @130" 4 1/2" stroke.
Logged

yobtaf103

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 106
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #16 on: January 01, 2020, 12:50:43 PM »
Quote from: HD Street Performance on January 01, 2020, 09:27:02 AM
I have been using unfinished S&S cylinders and the Mahle pistons very successfully. I season them, bore and hone in plates on a Sunnen CV616. Last set was skirt coated by line2line and made 160hp @ 126" 4 3/8" stroke. Owner reports it is very quiet.
Have another set in work 130" same deal @130" 4 1/2" stroke.
Yes Sir, Joe sent me a youtube link of it @ 2nd heat cycle start up, real quiet motor totally belies what it is amazing.

Unfinished ,in what way? S&S 4.250 taken to 4.280 what spigot thickness remains 0.065"
« Last Edit: January 01, 2020, 01:00:34 PM by yobtaf103 »
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #17 on: January 01, 2020, 01:18:10 PM »
No the bores slightly under and are not honed. Intended for a finished bore of 4.250, I bore to 4.275 and hone the rest.
Logged

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6939

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #18 on: January 02, 2020, 05:18:30 AM »
Quote from: yobtaf103 on January 01, 2020, 12:50:43 PM
Yes Sir, Joe sent me a youtube link of it @ 2nd heat cycle start up, real quiet motor totally belies what it is amazing.

Unfinished ,in what way? S&S 4.250 taken to 4.280 what spigot thickness remains 0.065"

You should hear that motor in person.  Zero Valve train noise, mechanically the motor is quite than a stock M8.  You can hear the cam lope in the exhaust.  It is an extremely strong motor.  Looking at the bike there are only two signs its not stock, the D&D exhaust and the sound of the exhaust.  Or if you look really hard you could see S&S on bottom of cylinder. 
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #19 on: June 03, 2020, 11:12:57 AM »
I just built my 2017 with Suburban SPeed 130 kit. Only mistake I made was I scrimped on the heads. Instead of waiting on CNC ported heads, I sent them my stock heads and had the the ports cleaned up.
Made 146 hp/149tq , I love it... but next time I'm not gonna be a tight ass and get better heads.

I exploded my compensator in 1500 miles..........so it makes lot tq
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6939

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #20 on: June 04, 2020, 06:39:10 AM »
Quote from: Ghost__Rider on June 03, 2020, 11:12:57 AM
I just built my 2017 with Suburban SPeed 130 kit. Only mistake I made was I scrimped on the heads. Instead of waiting on CNC ported heads, I sent them my stock heads and had the the ports cleaned up.
Made 146 hp/149tq , I love it... but next time I'm not gonna be a tight ass and get better heads.

I exploded my compensator in 1500 miles..........so it makes lot tq

Not sure its the heads.  Friends 126 with cleaned up stock heads is over 160/150.

Same head work done on my heads, and i'm over 160/160.

Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #21 on: June 06, 2020, 09:04:19 AM »
I use the Mahle pistons. They have proven to be very reliable when fit properly and honed the same. The stock cylinders go up to 4.125". I am now using a sleeved stock cylinder and have also bought unfinished S&S cylinders which I true true the tops and bottom, bore and hone up to and larger than 4.250, and season them with heat cycles. Very soon KB will be releasing large bore line2line coated M8 pistons which will be a nice addition. I am a distributor for KB pistons. 
Logged

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #22 on: June 11, 2020, 02:47:29 PM »
FLSTFI Dave, What pistons you running? I see you used different cams than I did. I used TTS 250 cams and Suburban speed flattop pistions. I'm 11.5:1 compression. I see your lot more compression. Can you run on pump gas when it's hot?
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #23 on: June 11, 2020, 02:52:39 PM »
I did the work for Dave. He is using the 130" pistons from Suburban (Mahle) flat tops and S&S cylinders. Heads milled and ported.
Logged

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #24 on: June 11, 2020, 03:04:34 PM »
Ok, I'm using same pistons then, but heads not milled.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6939

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #25 on: June 12, 2020, 06:30:20 AM »
Quote from: Ghost__Rider on June 11, 2020, 02:47:29 PM
FLSTFI Dave, What pistons you running? I see you used different cams than I did. I used TTS 250 cams and Suburban speed flattop pistions. I'm 11.5:1 compression. I see your lot more compression. Can you run on pump gas when it's hot?
Mahle pistons with milled heads.

So far no issue with heat, hasn't been over 91 degrees yet.  93 gas is readily available in my area, and not hard to find 93 no ethanol.  I have also road the bike through out North Western AR in mid 80 degree weather on 91 octane.  Bike did fine, both in a group ride in the mountains and pushing it a bit.  I have also done a 750 mile day in just under 10 hours on it.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

Fullsac Performance

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1768
  • Never ride with a Halfsac! Insist on Fullsac Perf!
    • AZ


    • CVO1: 2024 Road Glide
    • Fullsac Performance
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #26 on: June 12, 2020, 08:50:00 AM »
Quote from: Ghost__Rider on June 11, 2020, 03:04:34 PM
Ok, I'm using same pistons then, but heads not milled.

You're still thinking about what my finger pointed at when we only made 147 HP. Get set of Don's heads and I will tune it again for free!

All done with the burn outs and pushing it home?  :o  lol....
SG
Logged
Never argue with idiots. They will beat you with experience.

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #27 on: June 12, 2020, 01:15:20 PM »
Quote from: Fullsac Performance on June 12, 2020, 08:50:00 AM
You're still thinking about what my finger pointed at when we only made 147 HP. Get set of Don's heads and I will tune it again for free!

All done with the burn outs and pushing it home?  :o  lol....
SG

Smarty Pants............I'm good with the 147 hp. Just know there's more in there with different heads. I would if you weren't 1600 miles from here.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

Fullsac Performance

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1768
  • Never ride with a Halfsac! Insist on Fullsac Perf!
    • AZ


    • CVO1: 2024 Road Glide
    • Fullsac Performance
Re: SUBURBAN M8 124 or 130 CI PISTONS
« Reply #28 on: June 12, 2020, 01:29:37 PM »
Quote from: Ghost__Rider on June 12, 2020, 01:15:20 PM
Smarty Pants............I'm good with the 147 hp. Just know there's more in there with different heads. I would if you weren't 1600 miles from here.

If you bring your wife, you can stay at my house.  ::)

SG
Logged
Never argue with idiots. They will beat you with experience.
Pages: 1 [2]  All
« previous next »
 

Page created in 0.217 seconds with 21 queries.