Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roadrunner]

Did a brake fluid change and rear brake is spongy.

I didn't introduce any air into  the system, no abs codes, and abs light goes out when in gear.

I did drive the bike and do some hard braking to activate the abs.

Would i need the dealer to run the scan program for the abs or try to bleed again?

Cheers again!



Sent from my SM-N950U using Tapatalk

[rayson56]

Sounds like the old elusive air bubble.

[fastfreddy]

I was told by dealer that they have to use their scanner to bleed the brakes... not sure why, thinking to run the linked brake motor to remove the air  they wanted 200. bucks to flush brakes and clutch fluid

[roadrunner]

Dealer can purge for lack of a better word the abs module with the scanner, getting all the fluid out.

We can do a flush, ride the bike, brake to activate the abs, then flush again.

The snapon equix (sp) scanner can initiate a brake flush also. Assuming they have the hd software installed.

I'll give it another flush when my fluid  syringe pump comes in.

Thanks


Sent from my SM-N950U using Tapatalk