Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Öhlins 357 on 2019 CVO RG or SG?  (Read 148 times)

0 Members and 1 Guest are viewing this topic.

GB506

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 86
  • www.CVOHARLEY.com
    • WI


    • CVO1: 2019 FLHXSE
Öhlins 357 on 2019 CVO RG or SG?
« on: June 28, 2020, 09:07:34 PM »

Has anyone successfully mounted a set of Öhlins 357 remote reservoir shocks on a 2019 CVO?

The electrical connector on the 19 prevents the typical mounting position.

If you have, can you post a description of how you did it?

Thanks.


Sent from my iPad using Tapatalk
Logged

PASN YU

  • Ride Hard
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 159

    • CVO1: 2012 FLHXSE3 Ruby Red/Typhoon Maroon
    • CVO2: 2019 FLTRXSE Mako Shark
Logged
Trust, but verify.

GB506

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 86
  • www.CVOHARLEY.com
    • WI


    • CVO1: 2019 FLHXSE
Re: Öhlins 357 on 2019 CVO RG or SG?
« Reply #2 on: June 29, 2020, 02:37:28 PM »

https://bigbearperformance.com/product/bagger-remote-reservoir-brackets/

Smarty has a bracket that puts the reservoirs over the top of the rear fender and between the 4-point dock (see below), but I'm not particularly fond of that location or showing the reservoir cans at all.

I'm looking for a way to hide the reservoirs under the fender, but the late model CVO electrical connector is making that very difficult to achieve.

The 044 has a longer braided hose, which allows for a little more flexibility and mounting locations, but I suspect the 044 reservoirs would not mount out of sight with the late model CVO, either.

I might be pissing up a rope.
Logged
 

Page created in 0.188 seconds with 25 queries.