Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[smkymtnboy]

  wanted to add yaffe bars to my street glide and my quote came to roughly $950.00. no labor included!   my first thought was no way. is my thinking wrong.

[FLSTFI Dave]

The Yaffe 14" bars I put on my 17 CVO Street glide were right at 400 or so if memory serves me. 

I think bars and installation was 1000, maybe 1100.

[Cvostu]

I bought my bars for about 400.00    I paid 150.00 for the labor on a cvo rg.     I was told my guy gets about 50.00 more for a bat wing.   Those are a little more work.  Find an indy.  Shouldn't be much more than that.    Stuart.

[joe98]

Unfortunately, the Yaffe bars (and all of his products) on the higher end of the scale when it come to aftermarket improvements.  I know several people who claim that trying to pull the wires through yaffe apes can be a real challenge.  As the op said try to find and Indy or a friend and service manual....patience and a box of beer go along way.....🍺

[smkymtnboy]

Unfortunately, the Yaffe bars (and all of his products) on the higher end of the scale when it come to aftermarket improvements.  I know several people who claim that trying to pull the wires through yaffe apes can be a real challenge.  As the op said try to find and Indy or a friend and service manual....patience and a box of beer go along way.....🍺

i can install the bars. no problem there. my quote was 499.00 for 12 in bars. the installation wire cables banjo fittings etc came to 379.00 . then i think 80.00 my for the handle riser clamp. 20.00 for poly bushing. 35.00 for heat shrink.   

[kevin_n]

That seems high just for bars. I think you can buy the bars prewired for 500. I have read a lot of bad stories of trying to wire the yaffe bars, my Indy also said they are a pain to wire but as long as you take your time it should be ok.

[BigLock]

Yep I have a set on my 12 RG the inside of they are a pain to run wires Thur. I getting ready to change they out with KST. Yaffe bars are not that good of quality for the price. I pulled the KST off my 18 and replaced them with a set of Cordovas out of Calif.