Topic: Fairing Air Deflectors (Read 1624 times)

DW6019 · « **on:** November 18, 2004, 06:40:45 PM »

I discovered a better deal than Invisishield to keep the air deflectors from scratching the painted inner fairing. Go to Home Depot in the Faucet section and get 6 #00 flat Faucet washers. They are the correct inner diamater for the thumb screws and space the deflectors off the fairing just enough to keep it from being scratched. They are black and blend right in. Cost $1.30. They are firm enough to not compress and distort when the bolts are tightened. My photo skills suck so bad I am not even going to try and photo to upload. Just try it, you'll like it.

110tHunDer · « **Reply #1 on:** November 18, 2004, 07:03:09 PM »

Quote

My photo skills suck so bad I am not even going to try and photo to upload. Just try it, you'll like it.

LOL! At least you're honest! Thanks for passing along the tip, if not the photos!

mr_magoo · « **Reply #2 on:** November 19, 2004, 08:43:59 AM »

I used the rubber washers that come with the windsheild trim they are black as well.

MObe · « **Reply #3 on:** November 20, 2004, 12:47:51 PM »

Just went down to home depot and asked the guy in plumbing for some 00 faucet washers. $2.47 for 8 and they work great. Thanks for the heads up. [smiley=1syellow1.gif]

DW6019 · « **Reply #4 on:** November 20, 2004, 03:16:53 PM »

Mobe, Yours must be nicer than mine, I got ten in a package and they were $1.29. Glad you could use the tip.
Don

Author Topic: Fairing Air Deflectors (Read 1624 times)

DW6019

Fairing Air Deflectors

110tHunDer

Re: Fairing Air Deflectors

mr_magoo

Re: Fairing Air Deflectors

MObe

Re: Fairing Air Deflectors

DW6019

Re: Fairing Air Deflectors