Topic: Softbrake install question (Read 4277 times)

tlr · « **on:** September 05, 2023, 10:54:32 AM »

Hello all;

I recently installed a softbrake extended brake pedal on my 22 RG CVO. Install went fine but now the brake pedal does not seem to have a lot of stopping power. If I just use rear (as a test) it takes a lot of downward pressure to slow or stop bike. Could I have pinched something when I bolted it back together. I don't recall what the pedal felt like prior to install.

Thanks

OBB · « **Reply #1 on:** September 05, 2023, 12:31:51 PM »

Mine does the same thing with the EZ Brake level I installed. Dealer told me a long time ago that it was causing the issue. I've never swapped it back out to verify. Not sure if that is the issue or not. I've changed the rotor, pads and bled it countless times even with the stuff to flush the abs module.

Sent from my SM-N981U using Tapatalk

Author Topic: Softbrake install question (Read 4277 times)

tlr

Softbrake install question

OBB

Re: Softbrake install question