A friendly warning to those buying the Anodized Contrast Cut wheels. Anodizing will fade fast if not cared for and the contrast cut part is bare alum. It is good quality alum, but has no coating. It will pit, dull, spot etc if not constantly cared for. Sunlight (UV), brake dust (read change to a/m ceramic pads fast) and almost any brake dust product will dull the anodizing at a pretty significant rate.
Not sure how to properly care for them, but a friend had them on a crotch rocket and he couldn't keep up, so finally found a Powdercoat place and had his powdered clear over the anodizing. Now they shine very nice and are easy to clean, but Powdercoat guy would not guarantee it as it was first time he had done that type work.