The bike was dropped off on Sat. I will have it for 3 weeks to do some basic testing. I am working with a bike that has only Python sklip on's at this point. I am going to ride it for a few days , checking fuel MPG, engine noise, ping, going to do a few 1/4 mile runs with a GPS . Thus far it will ping under moderate throttle on flat ground, burns the inside's of my legs while riding and at times I think I am pulling a plow, as well the engine is a ticking monster,..we have some great hills and mountians here so I can put the bike through's its paces. The first add on will be tuning the bike with the SERT, then back though the testing process, then on to adding a cam and so on. It will be a long process but should be some very good data. Once done the bike will have ported heads, cam, 2-1 fat cat pipe with quite baffle. This may be a rather strange way of testing but i want to see what can be gains or lost ( I hope nothing will be lost) as far as MPG, performance, engine noise, etc. Stay tuned for the results