Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[twincam]

There was an aluminum 1/2 round plate that looked like the 4 that were used. I only pushed it back 1 1/4". There were also some washers that I think I forgot to install. Oh well.

the 1/2 round plate that you have goes in the back, under the chrome rack. hold on I will go take a couple of pics.

[twincam]

ok here are some pics hope this helps. this is your left over 1/2 round.

[twincam]

side

[twincam]

looking up , see the distance I have

[twincam]

front.... side

[twincam]

last one looking down

[hard10]

ok here are some pics hope this helps. this is your left over 1/2 round.

Ooops! I guess I missed that one 

[twincam]

didn't forget the ground wire did ya?

[hard10]

ok here are some pics hope this helps. this is your left over 1/2 round.

Chit! I've got those 1/2 round plates in-between the TP and the extention plate, not between the bolt and chrome thing.

[hard10]

didn't forget the ground wire did ya?

Nope! Got that one.

[hard10]

Nah, I've got the 1/2 plates right.

[hard10]

It just looks like I forgot that last 1/2 plate on the 5th screw. I guess it looks different because it is only 1 1/2" and nnot further back.

[twincam]

have you got the plate upside down???

[hard10]

Thank you Twincam for going out & taking the pix. You didn't have to do that.

Thanks again, AJ

[twincam]

anything for a cvo bro!!!!!!!