Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: roller rockers.  (Read 1174 times)

0 Members and 1 Guest are viewing this topic.

happyman

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 462
  • I love YaBB 1G - SP1!
roller rockers.
« on: August 10, 2007, 06:41:17 PM »

am curious if the 07 CVO, has roller rockers??  if it matters my bke is the   Roadking.

         Thanks
                           Happy
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: roller rockers.
« Reply #1 on: August 10, 2007, 10:36:29 PM »

Does not have roller rockers.   
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

Too many experts!

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: roller rockers.
« Reply #2 on: August 11, 2007, 07:05:39 AM »

Looks like for 30+k, they would just ease a set in and not make a big deal of it....(dealer says the 110 / SE255 doesn't need them - not enough lift to worry about) They ease the load on the valve train for the long haul and eliminate the side swipe on the valve stem....

Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: roller rockers.
« Reply #3 on: August 11, 2007, 08:26:59 AM »

usually install them on 600 lift or higher cams, although they do make more noise.
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

happyman

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 462
  • I love YaBB 1G - SP1!
Re: roller rockers.
« Reply #4 on: August 11, 2007, 08:51:19 AM »

usually install them on 600 lift or higher cams, although they do make more noise.
actually i am suprised they don't use them but its cost again..  i am not sure of the lift if the   stock cams but the  ramps are pretty mild for sure.. used to be  550 lift you should install  them in the evo but then they have a little more angle on the  pushrods too.  i am gonna install a 575 cam so i  imagine it won't make a lot of differance in longivity at all.. i have installed rollers in at least 5 evo's and it quieted all of them down a lot..  i hear now and again  tht they make more noise but myself and many friends  use them with just the opposite results..   pretty strange
               Happy
Logged
 

Page created in 0.213 seconds with 21 queries.