Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Alarm pager will not work on my 08 SERK....  (Read 1300 times)

0 Members and 1 Guest are viewing this topic.

momoharley

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
Alarm pager will not work on my 08 SERK....
« on: October 04, 2007, 10:14:57 AM »

I bought the alarm pager a couple weeks back and was having problems with getting it to marry with the alarm.

Dropped the bike off yesterday at the stealer to get my SERT and pipes installed. I asked them to look into why the pager wouldn't work.

It turns out the the SE ship with the Smart Siren I from the factory. The pager needs the version II, in order to pick up the signal.

Why the HECK didn't the MOCO install the latest version!!!  I had to shell out more money to get the version II module installed so that the pager will work.

I thought that this was their premiere line, why are they not putting the latest stuff on the bikes!!!

Thanks for letting me vent.
Logged

VAZHOG

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2207
Re: Alarm pager will not work on my 08 SERK....
« Reply #1 on: October 04, 2007, 10:48:29 AM »

They were not on the 06 models either so (HD) found another way to get more $$ after you thought you were all in. ;D
Logged

bisounours

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7382

Re: Alarm pager will not work on my 08 SERK....
« Reply #2 on: October 04, 2007, 12:03:39 PM »

The Harley-Davidson® Security System Pager # 91665-03 works perfectly on bike CUSE²  07 .

Jacques

Logged
********2007 FLHTCUSE2 Red/Black**********
 
     2008 FLHTCUSE3, White Frost and Silver Mist
             
                  2011 FLHXSE2, Stage1

2013 FLHRSE5   Crushed Sapphire with Cold Fusion GraphicsCrushed Sapphire with Cold Fusion Graphics

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50580
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Alarm pager will not work on my 08 SERK....
« Reply #3 on: October 04, 2007, 12:09:39 PM »

I bought the alarm pager a couple weeks back and was having problems with getting it to marry with the alarm.

Dropped the bike off yesterday at the stealer to get my SERT and pipes installed. I asked them to look into why the pager wouldn't work.

It turns out the the SE ship with the Smart Siren I from the factory. The pager needs the version II, in order to pick up the signal.

Why the HECK didn't the MOCO install the latest version!!!  I had to shell out more money to get the version II module installed so that the pager will work.

I thought that this was their premiere line, why are they not putting the latest stuff on the bikes!!!

Thanks for letting me vent.


You obviously don't understand the privilege the MoCo allows when it prepositions future accessory upgrades in to the product.  They allow the opportunity to spend more money with them and we are supposed to thank them for that forethought.  Really, just ask 'em.
Logged

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: Alarm pager will not work on my 08 SERK....
« Reply #4 on: October 04, 2007, 12:44:29 PM »

The Harley-Davidson® Security System Pager # 91665-03 works perfectly on bike CUSE²  07 .

Jacques



The only thing about that version, Jacques, is that it costs nearly as much as just replacing the whole thing with the Siren II and smaller, more compact paging unit.  The old units were notoriously short lived and had a short range as well.  Just ask d00d...
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: Alarm pager will not work on my 08 SERK....
« Reply #5 on: October 04, 2007, 12:48:27 PM »


You obviously don't understand the privilege the MoCo allows when it prepositions future accessory upgrades in to the product.  They allow the opportunity to spend more money with them and we are supposed to thank them for that forethought.  Really, just ask 'em.

And the parts guys/gals are kind enough to let you go ahead and order the pager, knowing (or more than likely, not knowing) that it won't work without the Siren II, so they not only give you the privilege of buying the new parts, but the opportunity for you to scratch your watch and wind your ass trying to figure out why it won't work with the existing alarm system....then you get to wait on the new Siren II part to arrive... ::) ::) ;D ;)
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32682
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Alarm pager will not work on my 08 SERK....
« Reply #6 on: October 04, 2007, 02:59:52 PM »

The Harley-Davidson® Security System Pager # 91665-03 works perfectly on bike CUSE²  07 .

Jacques



The only thing about that version, Jacques, is that it costs nearly as much as just replacing the whole thing with the Siren II and smaller, more compact paging unit.  The old units were notoriously short lived and had a short range as well.  Just ask d00d...
TC is correct on this. If you are looking to add the pager system to your bike go w/the newer Smart Siren II setup. The one that Jacques is showing is the one I originally had on my bike, and I had to have it replaced because either the transmitter or the receiver died and it wouldn't work anymore. Unit lasted about two years before it was replaced and also the range isn't as good as the newer model.

Unfortunately they don't supply these on the CVO's from stock, but don't worry this will not be the only thing you find that didn't come standard on their premier model. :-\

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

bisounours

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7382

Re: Alarm pager will not work on my 08 SERK....
« Reply #7 on: October 04, 2007, 03:59:58 PM »

I agree with you  for the pager system with newer Smart Siren II.
It's better than the oldest.
Mine was an opportunity on Ebay and when it'll die , it will be not a big loss.

Jacques

Logged
********2007 FLHTCUSE2 Red/Black**********
 
     2008 FLHTCUSE3, White Frost and Silver Mist
             
                  2011 FLHXSE2, Stage1

2013 FLHRSE5   Crushed Sapphire with Cold Fusion GraphicsCrushed Sapphire with Cold Fusion Graphics
 

Page created in 0.218 seconds with 21 queries.