Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[springer-]

At www.BigBoyzDynoTuning.com there is a "Live Web Cams" link.  This weekend we will be in the Dyno Shop tuning a '08 110" CVO and you are welcome to log on to the cam and watch. 

The camera works best with Internet Explorer.  It will require an active X install and all the instructions are on the web cam page, very easy to do.  If anyone has problems getting the camera to work, post back here and I will do my best to help.

[springer-]

We're getting ready to start tuning.  The camera is on and has sound and control so it can be moved around.  If you have any questions feel free to post them here and I will check back during the day.  I hope a few will check it out.  Thanks !

[Chief]

We're getting ready to start tuning.  The camera is on and has sound and control so it can be moved around.  If you have any questions feel free to post them here and I will check back during the day.  I hope a few will check it out.  Thanks !

It's asking for User ID and pwd....

[Twolanerider]

Link is dead.

[Twolanerider]

Chuck, you broke it.  You were there first.  Couldn't have been me .

[Chief]

Chuck, you broke it.  You were there first.  Couldn't have been me .

I here giggling in the background. Things that make you go "Hmmmmm"

[Twolanerider]

I here giggling in the background. Things that make you go "Hmmmmm"

Just remember, this is how we work on a website > 

[JCZ]

It's working for me.....

[Chief]

I'm in. DO NOT click on the PLAYER link. That's what I did wrong.

[Twolanerider]

Weird.  I don't even get the home site to come up.  Who knows.... 

[FNGw/08SERK]

Working 4 me

[springer-]

For those watching we just completed the first run.  We run 1500 rpm to 3000 rpm in 250 rpm increments at 10% throttle position and 15%, 20%, 25%, 30%, 40%, 60%, 80% and 100%.  Sniffing both cylinders individually.

Now we are reviewing the data and figuring out what changes we'll need to make for the next run.  The next run will be the same as the last so we can compare what effect the changes had.

It will take about 20 minutes or so to evaluate the data.

[Hoist!]

Anyone catching this? A day in the life of springer! Cool!

Hey guys, how's the Chinese Food. Did ya get the extra Chile Paste?

Thanks for sharing your routine with us. But where's the music?

Hoist!

[springer-]

Yesterday we did all the fuel for 1500-3000 rpm range.  That consisted of 4 runs, 1 tank of fuel and 147 miles.  In some partial throttle areas we gained 12-14lbs of torque over the dealer loaded SERT stage 1 map.

Today we'll do 3500 rpm and up.  We made many initial timing changes but will fine tune the timing for the entire range after the fuel is done.  We'll also fine tune the lower RPM and throttle positions, below 1500 rpm and below 10%.

[Twolanerider]

Yesterday we did all the fuel for 1500-3000 rpm range.  That consisted of 4 runs, 1 tank of fuel and 147 miles.  In some partial throttle areas we gained 12-14lbs of torque over the dealer loaded SERT stage 1 map.

Today we'll do 3500 rpm and up.  We made many initial timing changes but will fine tune the timing for the entire range after the fuel is done.  We'll also fine tune the lower RPM and throttle positions, below 1500 rpm and below 10%.

Damn, two days and literally hundreds of miles.  Almost afraid to ask what it costs to get a tune there.  That's a lot of time to pay for.