>Was wondering how did you run the power up to the mount?
Inside the handlebars back to the battery
I also ran the FM modulator audio output wire from inside the handlebars to FM modulator mounted on the side of the HD radio.
>Could you supply some part numbers or links to the parts you used in this install?
Here Ya go...
Project Parts List Garmin Zumo 550
Delphi SkyFi FM Modulator SA 10003 $10.95 (eBay)
Direct from Powerlet: (call)
www.powerletproducts.com1) PKT-068 bracket with socket assembly (no wiring harness for 1 1/4" bars) - Chrome
1) Techmount Riser 2 ½” inches / from Powerlet – Chrome Approx $50.00
1) Techmount Accessory Quick Change Adapter $14.95
1) PPC-020-SC GARMIN ZUMO POWER CABLE
Short cable-SC at 12" in length w/Powerlet PPL-002 straight plug $32.95
(I might recommend a 10" cable and a right angle plug. It might be a cleaner look and easier to use.)
2) 194 amber bulbs and sockets Auto Zone or you can use resistors and not have two lit bulbs inside your faring. (real cheap)
1) Sound Professionals SP-SPSC-7 Gold Plated 1/8” Right Angle Stereo Patch Cable - 8 inches $5? (wesite)
1) Radio Shack 274-886 Gold Plated female-female 1/8” coupler $11.00
2) Stainless 4mm screws from Ace Hardware $1.00
2) P clamps Ace Hardware (so cheap they were almost free)
1) Plastic cap (free)