Topic: Baker Plus One Oil Pan (Read 1336 times)

roadrunner · « **on:** March 15, 2008, 07:05:07 PM »

Has anyone tried the Baker Plus One Oil Pan? Since I have my motor out I was thinking if this would be a good addition. (http://www.bakerdrivetrain.com/flt/index.htm#p1p) I dont have the bike here to see if the RideStr8 will interfere. Anyone have any comments? Thanks!

Chief · « **Reply #1 on:** March 15, 2008, 07:16:38 PM »

Quote from: roadrunner on March 15, 2008, 07:05:07 PM

Has anyone tried the Baker Plus One Oil Pan? Since I have my motor out I was thinking if this would be a good addition. (http://www.bakerdrivetrain.com/flt/index.htm#p1p) I dont have the bike here to see if the RideStr8 will interfere. Anyone have any comments? Thanks!

Because of the way the Baker P1 pan is built, you will not be able to use any of the current stabilizers, except the Alloy Art unit utilizing the boss on the underside of the pan. The new pan design prevents accessing the bolts as is necessary for most of the bolt on stabilizer brackets.

roadrunner · « **Reply #2 on:** March 15, 2008, 07:18:13 PM »

Thanks, saves me some $$!

110tHunDer · « **Reply #3 on:** March 15, 2008, 07:32:32 PM »

Discussion already taking place about this product here: http://www.cvoharley.com/smf/index.php?topic=21133.0, so I'll lock this topic down.

Author Topic: Baker Plus One Oil Pan (Read 1336 times)

roadrunner

Baker Plus One Oil Pan

Chief

Re: Baker Plus One Oil Pan

roadrunner

Re: Baker Plus One Oil Pan

110tHunDer

Re: Baker Plus One Oil Pan