Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Fat Cat Headpipe Question  (Read 738 times)

0 Members and 1 Guest are viewing this topic.

hdbrad03

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2097
  • FLHRSEI.ORG

    • CVO1: 2009 FLTRSE3 Yellow Pearl/Charcoal Slate
    • CVO2: FLHTCSE-Pumpkin
    • CVO3: FLTRI 06
Fat Cat Headpipe Question
« on: March 22, 2008, 12:09:38 PM »

Installing Fat Cat on 04 SEEG when apply headpipe does the TAB on the headpie go on top or bottom of the transmission bracket?  :nixweiss:

 :pumpkin:

Brad
Logged
I was there.  Were you?

East Coast
New River Gorge (10, 15)
Rib Fest (10, 11, 14, 15)
Wild WV (16)
Maggie Valley (08, 09, 10, 11, 12, 13, 14, 15, 16, 17)

West Coast
Sedona, AZ (08)
Pala (10)
Santa Fe, NM (13)

maineultraclassic

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57
  • Not a CVO bike, but still a blast to ride!!
    • Steve's Harley
Re: Fat Cat Headpipe Question
« Reply #1 on: March 22, 2008, 10:01:48 PM »

Every bike is different, and you'll know when you install the headpipes if it goes on top or under. On my bike, the tab sits on top of the bracket's tab, and I didn't use the spacers on the rear bracket. You want the system to be linear, when you stand back and look at it, it should all be straight from the headpipes back to thru the muffler.

Steve
Logged
--------------------------------
2005 Harley Davidson Electra Glide Ultra Classic FLHTCUI
--------------------------------
95" Powered by Big Boyz Heads, Woods Cams, Doherty A/C, TTS, Fatcat, Hillside TB, and Cometic
Built by Me, Tuned by Bean
 

Page created in 0.2 seconds with 24 queries.